EMTEK PHC0412-Series High Current Power Inductors
The EMTEK PHC0412-Series are high current power inductors designed for reliable performance in various electronic applications. These inductors are suitable for general-purpose use and are delivered in taping or bulk packaging.
Product Attributes
- Brand: EMTEK
- Product Name: PHC0412-Series
- Origin: Taiwan, R.O.C.
- Certifications: Not specified in the provided text.
Technical Specifications
| EMTEK Part No. | Inductance (H) | Tolerance (%) | Rdc (m) Typ. | Rdc (m) Max. | DC Current Idc (A) Typ. | DC Current Isat (A) Typ. | Operating Temperature Range (C) |
| PHC0412-R10-T | 0.10 | M (20%) | 9.0 | 11.0 | 10.0 | 15.0 | -40 to +125 |
| PHC0412-R22-T | 0.22 | M (20%) | 15.0 | 18.0 | 7.0 | 10.0 | -40 to +125 |
| PHC0412-R24-T | 0.24 | M (20%) | 11.0 | 15.0 | 7.50 | 11.5 | -40 to +125 |
| PHC0412-R33-T | 0.33 | M (20%) | 17.0 | 19.0 | 6.50 | 8.4 | -40 to +125 |
| PHC0412-R36-T | 0.36 | M (20%) | 18.0 | 20.0 | 6.40 | 7.8 | -40 to +125 |
| PHC0412-R47-T | 0.47 | M (20%) | 19.0 | 21.0 | 6.00 | 6.8 | -40 to +125 |
| PHC0412-R68-T | 0.68 | M (20%) | 32.0 | 36.0 | 4.50 | 6.0 | -40 to +125 |
| PHC0412-1R0-T | 1.0 | M (20%) | 43.0 | 47.0 | 4.20 | 5.2 | -40 to +125 |
| PHC0412-1R2-T | 1.2 | M (20%) | 43.0 | 55.0 | 4.00 | 5.1 | -40 to +125 |
| PHC0412-1R5-T | 1.5 | M (20%) | 68.0 | 75.0 | 3.25 | 4.0 | -40 to +125 |
| PHC0412-2R2-T | 2.2 | M (20%) | 79.4 | 83.5 | 2.75 | 3.5 | -40 to +125 |
Shapes and Dimensions
| Dimension | Value (mm) |
| A | 4.450.25 |
| B | 4.060.25 |
| C | 1.2 Max. |
| D | 2.00.3 |
| E | 0.760.3 |
Packaging
Packaging is designed to prevent damage during transport and storage. The product is available in taping (1,000 pcs./reel 180 mm reel type) or bulk form.
Recommended Reflow Pattern
Reflow soldering can be performed up to two times. For iron soldering, use a solder iron of less than 30W and avoid direct contact with the ceramic body outside the terminal electrode. Soldering time should be 5 seconds max. at 260C.
Precautions
When using these products, avoid exposure to splashing water or salt water, dew condensation, toxic gases (Hydrogen sulfide, Sulfurous acid, Chlorine, Ammonia), and vibrations or shocks exceeding specified conditions. Be cautious of stress on the product due to board flexure after mounting.
Storage Conditions
Temperature: 20~25C, Relative Humidity: 40%~60%
Notes
- All test data is referenced to 25 ambient.
- Idc: DC current (A) that will cause an approximate T of 40.
- Isat: DC current (A) that will cause Lo to drop approximately 30%.
- The rated current is the lower of saturation current or heating current.
- Part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions.
- Recommended wire wound inductors should be used within 6 months from the time of delivery.
2410121623_EMTEK-PHC0412-R47M-T_C251697.pdf
|
|
High current power inductor EMTEK PHC0412-R47M-T designed for stable operation in electronic circuits Images
|
