Home > Feed Through Capacitors >

Low ESL Chip Multilayer Ceramic Capacitor muRata NFM31PC276B0J3L for High Current Electronic Equipment

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Low ESL Chip Multilayer Ceramic Capacitor muRata NFM31PC276B0J3L for High Current Electronic Equipment

Nominal Capacitance : 27uF

Operating Temperature : -40℃~+85℃

Voltage Rating : 6.3V

Tolerance : ±20%

DC Resistance(DCR) : 5mΩ

Current Rating : 6A

Description : 27uF ±20% 5mΩ SMD-4P,3.2x1.6mm Feed Through Capacitors RoHS

Mfr. Part # : NFM31PC276B0J3L

Model Number : NFM31PC276B0J3L

Package : SMD-4P,3.2x1.6mm

Contact Now

Product Overview

The NFM31PC276B0J3 is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers advantages such as low ESL and suitability for high current applications.

Product Attributes

Brand: MURATA
Product Type: Chip Multilayer Ceramic Capacitors (EMIFIL)
Series: NFM31
Packaging: 180mm Reel (EMBOSSED W8P4, 3000 pcs./Reel)

Technical Specifications

Item	Specification	Test Method
Nominal Capacitance	27 uF	Frequency: 120Hz, Voltage: 0.50.1V(rms)
Capacitance Tolerance	20 %
DC Rated Voltage	DC 6.3 V
Rated Current	6A(DC)
DC Resistance	5mmax.	Measured with 100mA max.
Insulation Resistance	20Mmin.	Voltage: Rated Voltage x 300%, Time: 1 to 5 s
Operating Temp. Range	-40 to 85 C	Includes self-heating
Storage Temp. Range	-40 to 85 C
Dimensions (L x W x T)	3.20.2 x 1.60.2 x 1.30.2 mm
Dimensions (e)	0.40.3 mm
Dimensions (f)	0.3 min.
Dimensions (g)	1.10.3 mm
Dimensions (j)	0.30.2 mm
Appearance	No defects or abnormalities.	Visual inspection.
Solderability	Electrodes shall be at least 90% covered with new solder coating. Products shall be no failure after tested.	Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 150 10C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 240 3C, Immersion Time: 3 1 s
Resistance to soldering heat	Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max.	Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 270 5C, Immersion Time: 10 1 s
Bending Strength	Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max.	Soldered on glass-epoxy substrate (100 x 40 x 1.0 mm), Deflection: 2 mm, Keeping Time: 30 s
Drop	Appearance: No damaged, Capacitance: Meet the initial rated value., DC Resistance: 0.05 max.	Dropped on concrete or steel board, Height: 1m, Attitude: 3 directions
Bonding Strength	The electrodes shall be no failure after tested.	Soldered on glass-epoxy substrate, Applying Force (F): 9.8 N, Applying Time: 30 s
Vibration	Appearance: No damaged, Cap. Change: Within 7.5%, DC Resistance: 0.05 max.	Soldered on glass-epoxy substrate, Oscillation Frequency: 10 to 55 to 10Hz for 1 minute, Double Amplitude: 1.5 mm, Time: 2 hours in each of 3 mutually perpendicular directions.
Temperature Cycling	Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max.	10 cycles of temp. change from -40C to +85C
Humidity	Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max.	40 2 C, 90 to 95%(RH), 500+24 / -0 hours
Heat Life	Appearance: No damaged, Cap. Change: Within 12.5%, I.R.: 50min, DC Resistance: 0.05 max.	Maximum Operating Temperature2C, Test Voltage: Rated Voltage150%, Time: 1000+48 / -0 hours

2410121921_muRata-NFM31PC276B0J3L_C118987.pdf

Quality Low ESL Chip Multilayer Ceramic Capacitor muRata NFM31PC276B0J3L for High Current Electronic Equipment for sale

Low ESL Chip Multilayer Ceramic Capacitor muRata NFM31PC276B0J3L for High Current Electronic Equipment Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!