| Scope | Chip EMIFIL Chip 3-terminal Capacitor for Large Current for General Electronic equipment. | |
| MURATA Part NO. System | NFM18PC104R1C3 | |
| Type & Dimensions | (Unit:mm) L:1.60.1, W:0.80.1, T:0.60.1, e:0.250.1, f:0.2 min. | |
| Nominal Capacitance | 0.1 uF | |
| Capacitance Tolerance | 20 % | |
| DC Rated Voltage | DC 16 V | |
| Rated Current | 2A(DC) | |
| DC Resistance | 30mmax. | |
| Insulation Resistance | 1000Mmin. | JEMCPS-02211C |
| Operating /Storage Temp. Range | -55 to 125 C | |
| Electrical Performance - Capacitance | 0.1 uF | Frequency : 1.00.1kHz, Voltage : 10.2V(rms) |
| Electrical Performance - Withstanding Voltage | Rated Voltage x 300% | Time : 2 minutes max. |
| Electrical Performance - DC Resistance | Measured with 100mA max. | |
| Electrical Performance - Operating Temperature | Shown in Rated value. Includes self-heating | |
| Electrical Performance - Storage Temperature | Shown in Rated value. | |
| Mechanical Performance - Appearance | No defects or abnormalities. | Visual inspection. |
| Mechanical Performance - Dimensions | Within the specified dimensions. | Using calipers. |
| Mechanical Performance - Solderability | Flux : Ethanol solution of rosin, 25(wt)%, Pre-heat : 15010C, 60 to 90s, Solder : Sn-3.0Ag-0.5Cu, Solder Temperature : 240 3C, Immersion Time : 31 s | |
| Mechanical Performance - Resistance to soldering heat | Flux : Ethanol solution of rosin, 25(wt)%, Pre-heat : 15010C, 60 to 90s, Solder : Sn-3.0Ag-0.5Cu, Solder Temperature : 270 5C, Immersion Time : 10 1 s | |
| Mechanical Performance - Bending Strength | Deflection : 2 mm, Keeping Time : 30 s | It shall be soldered on the glass-epoxy substrate (100401.0mm). |
| Mechanical Performance - Drop | Height : 1m | It shall be dropped on concrete or steel board. Attitude from which the product is dropped : 3 directions |
| Mechanical Performance - Bonding Strength | Applying Force (F) : 9.8 N, Applying Time : 10 s | It shall be soldered on the glass-epoxy substrate. |
| Mechanical Performance - Vibration | Oscillation Frequency : 10 to 2000 to 10Hz for 20 minute. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. | It shall be soldered on the glass-epoxy substrate. Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) |
| Environment Performance - Temperature Cycling | -55+0 / -3C / 30+3 / -0 min, Room Temperature / within 3 min, Maximum Operating Temperature +3 / -0C / 30 +3 / -0 min, Room Temperature / within 3 min | Total of 10 cycles |
| Environment Performance - Humidity | Temperature : 402C, Humidity : 90 to 95%(RH), Time : 500+24 / -0 hours | |
| Environment Performance - Heat Life | Temperature : Maximum Operating Temperature 2 C, Test Voltage : Rated Voltage x 200%, Charge Current : 50 mA max., Time : 1000+48 / -0 hours | |
| Packaging Code | R1C3 | |
| Packaging Unit | 4000 pcs./Reel | W8P4 |
