Home > Pin Configurable/Selectable Oscillators >

MICROCHIP DSC612PI3A010K ultra small MEMS clock generator with two configurable LVCMOS output clocks

Product Categories

Crystals [3000]
Delay Lines [5]
Aluminum - Polymer Capacitors [1170]
Aluminum Electrolytic Capacitors [3000]
Oscillators [539]
Thumbwheel Potentiometers [25]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [2074]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [84]
Common Mode Chokes [1585]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Ferrite Beads and Chips [1587]
Wireless Charging Coils [34]
Current Sense Resistors [126]
Power Line Filter Modules [49]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
EMI/RFI Filters (LC, RC Networks) [154]
Ceramic Capacitors [3000]
Film Capacitors [843]
Resistor Networks, Arrays [637]
Pin Configurable/Selectable Oscillators [13]
Stand Alone Programmers [1]
Fixed Inductors [3000]
Silicon Capacitors [2]
Ceramic Filters [216]
Adjustable Power Resistor [64]
Rotary Potentiometers, Rheostats [235]
Trimmer Potentiometers [1622]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Through Hole Resistors [711]
Resonators [79]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Tantalum - Polymer Capacitors [175]
Tantalum Capacitors [143]
RF Filters [231]
Motor Start, Motor Run Capacitors (AC) [29]
Thin Film Capacitors [999]
Programmable Oscillators [242]
Trimmers, Variable Capacitors [10]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

MICROCHIP DSC612PI3A010K ultra small MEMS clock generator with two configurable LVCMOS output clocks

Operating Temperature : -40℃~+85℃

Output Frequency(Max) : 100MHz

Number of Outputs : 2

Voltage - Supply : 1.71V~3.63V

Description : 100MHz 2 VFLGA-6 Pin Configurable/Selectable Oscillators RoHS

Mfr. Part # : DSC612PI3A-010K

Model Number : DSC612PI3A-010K

Package : VFLGA-6

Contact Now

Product Overview

The DSC612 is a MEMS-based, crystal-less clock generator family offering an ultra-small footprint and low power consumption. It eliminates the need for external crystals or reference clocks, enhancing reliability and accelerating product development. The DSC612 generates up to two independent LVCMOS output clocks, each configurable from 2 kHz to 100 MHz. It features Microchips PureSilicon MEMS technology for low jitter and high stability across a wide range of supply voltages and temperatures. The device includes control inputs for output enable/disable, standby, sleep, spread spectrum enable, and frequency select. Available in compact VFLGA packages, it is ideal for low power, portable, consumer, and industrial applications.

Product Attributes

Brand: Microchip Technology Inc.
Certifications: AEC-Q100 Available (Automotive Option)
Compliance: Lead-Free and RoHS-Compliant
Technology: MEMS-Based, PureSilicon MEMS
Package Sizes: 1.6 mm x 1.2 mm, 2.0 mm x 1.6 mm, 2.5 mm x 2.0 mm

Technical Specifications

Parameter	Symbol	Min.	Typ.	Max.	Units	Conditions
Supply Voltage	VDD	1.71		3.63	V	Note 1
Active Supply Current	IDD		5	6	mA	fCLK1 = 27 MHz, fCLK2 = 25 MHz, VDD = 1.8V, No Load
Active Supply Current (Sleep Mode, 1 PLL Off)	IDDSL		3		mA	CLK2 = SLEEP, fCLK1 = 25 MHz, VDD = 1.8V, No Load
Active Supply Current (32.768 kHz Output Only)	IDD32k		1.4		mA	CLK2 = SLEEP, fCLK1 = 32.768 kHz, VDD = 1.8V, No Load
Standby Supply Current	ISTDBY		1.0		A	VDD = 1.8V/2.5V; Excludes input pull-up current.
Standby Supply Current	ISTDBY		1.5		A	VDD = 3.3V; Excludes input pull-up current.
Frequency Stability	f			20	ppm	All temperature ranges
Frequency Stability	f			25	ppm	All temperature ranges
Frequency Stability	f			50	ppm	All temperature ranges
Aging	f		5		ppm	1st year @ +25C
Aging	f		1		Per year after the first year
Startup Time	tSU			1.5	ms	From 90% VDD to valid clock output, T = +25C
Input Logic High	VIH	0.7 x VDD			V	Input waveform must be monotonic with rise/fall time < 10 ms.
Input Logic Low	VIL			0.3 x VDD	V	Input waveform must be monotonic with rise/fall time < 10 ms.
Output Disable Time	tDA			200 + 2 Periods	ns	Note 5
Output Enable Time	tEN		1.0		s	Note 6
Output Logic High	VOHY	0.8 x VDD			V	I = 6 mA (high drive) or I = 3 mA (standard drive)
Output Logic Low	VOLY			0.2 x VDD	V	I = 6 mA (high drive) or I = 3 mA (standard drive)
Output Transition Time, Rise Time/Fall Time (Standard Drive)	tRY1/tFY1		1.2	2.0	ns	CL = 10 pF, VDD = 1.8V; 20% - 80%
Output Transition Time, Rise Time/Fall Time (Standard Drive)	tRY1/tFY1		0.6	1.2	ns	CL = 10 pF, VDD = 2.5V/3.3V; 20% - 80%
Output Transition Time, Rise Time/Fall Time (High Drive)	tRY2/tFY2		1.0	1.5	ns	CL = 15 pF, VDD = 1.8V; 20% - 80%
Output Transition Time, Rise Time/Fall Time (High Drive)	tRY2/tFY2		0.5	1.0	ns	CL = 15 pF, VDD = 2.5V/3.3V; 20% - 80%
Output Frequency Range	f0	0.002		100	MHz
Output Duty Cycle	SYM	45		55	%
Period Jitter, RMS	JPER		17		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V
Period Jitter, RMS	JPER		14		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V
Period Jitter, RMS	JPER		9		ps	fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V
Period Jitter, Peak-to-Peak	JPER		120		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V
Period Jitter, Peak-to-Peak	JPER		100		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V
Period Jitter, Peak-to-Peak	JPER		80		ps	fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V
Cycle-to-Cycle Jitter (peak)	JCy-Cy		105		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 1.8V
Cycle-to-Cycle Jitter (peak)	JCy-Cy		90		ps	fCLK1 = 24 MHz, fCLK2 = 27 MHz, VDD = 3.3V
Cycle-to-Cycle Jitter (peak)	JCy-Cy		70		ps	fCLK1 = 27 MHz, fCLK2 = 27 MHz or 32.768 kHz, VDD = 3.3V
Junction Operating Temperature	TJ			+150	C
Storage Temperature Range	TS	55		+150	C
Lead Temperature				+260	C	Soldering, 40s

2411261528_MICROCHIP-DSC612PI3A-010K_C1519627.pdf

MICROCHIP DSC612PI3A010K ultra small MEMS clock generator with two configurable LVCMOS output clocks Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!