| Operating temperature | -40 to +85C |
| Storage Temperature | -40 to +85C |
| Insulation Resistance | 1000M min. |
| Rated Current | 6A(DC) |
| Marking (Capacitance) | Marked three digits system. (Ex.221) |
| Marking (Rated Voltage) | Marked voltage value.(100V) |
| Testing Conditions (Temperature) | Ordinary Temperature 15 to 35C |
| Testing Conditions (Humidity) | Ordinary Humidity 25 to 85 %(RH) |
| Testing Conditions (Temp. for doubt) | 20 2C |
| Testing Conditions (Humidity for doubt) | 60 to 70 %(RH) |
| Testing Conditions (Atmospheric Pressure) | 86 to 106 kPa |
| Capacitance Test Voltage (22pF150pF) | 10.2Vrms at 10.1MHz |
| Capacitance Test Voltage (220pF100000pF) | 10.2Vrms at 10.1kHz |
| Insulation Resistance Test Voltage | Rated Voltage for 1 minute through a suitable resistor 1M |
| Withstanding Voltage Test Voltage | 2.5 times for Rated Voltage for 1 to 5 seconds (Charge Current: 10 mA max.) |
| Solderability Flux | Ethanol solution of rosin, 25(wt)% |
| Solderability Pre-heat | 15010, 6090 s |
| Solderability Solder | Sn-3.0Ag-0.5Cu |
| Solderability Solder Temperature | 2455 |
| Solderability Immersion Time | 2 0.5 seconds |
| Resistance to Soldering Heat Solder Temperature | 270 5 C |
| Resistance to Soldering Heat Immersion Time | 3 0.5 seconds |
| Resistance to Soldering Heat Soldering iron output | 30W |
| Resistance to Soldering Heat Tip temperature | 37010C |
| Resistance to Soldering Heat Soldering time | 5s(+0/-1s) |
| Humidity Test Temperature | 60C |
| Humidity Test Humidity | 90 to 95 %(RH) for 500 hours(+24-0 hours) |
| Humidity Life Test Temperature | 40 2C |
| Humidity Life Test Humidity | 90 to 95 %(RH) for 500 hours(+24-0 hours) |
| Humidity Life Applying Voltage | 1H/ Rated Voltage 50VDC, 2A/ Rated Voltage 100VDC |
| Heat Life Test Temperature | 85 3C |
| Heat Life Applying Voltage | 1H/ Rated Voltage 50VDC, 2A/ Rated Voltage 100VDC |
| Heat Life Time | 500 hours(+24-0 hours) |
