| MOS1/2, MOSX1/2 | 0.5W | 10 - 47k | 5% (J), 2% (G), 1% (F) | 400V | E = P x R | -55C to +200C | 300 | 0.6mm (for T526, CT526) | See detailed diagrams in source document for specific dimensions (l, L, C, D, d) |
| MOS1, MOSX1 | 1.0W | 10 - 47k (MOSX1/2: 0.22 - 9.1) | 5% (J), 2% (G), 1% (F) | 500V | E x 2.5 | 0.8mm (for T528, CT528) |
| MOS2, MOSX2 | 2.0W | 10 - 47k (MOSX2: 0.22 - 9.1) | 5% (J), 2% (G), 1% (F) | 700V | E = P x R | 0.8mm |
| MOS3, MOSX3 | 3.0W | 10 - 68k (MOSX3: 0.1 - 9.1) | 5% (J), 2% (G), 1% (F) | 600V | E x 2.5 | 0.8mm |
| MOS5, MOSX5 | 5.0W | 10 - 68k (MOSX5: 10 - 100k) | 5% (J), 2% (G), 1% (F) | 600V | E = P x R | 0.8mm |
| Performance Characteristics: |
| Parameter | Requirement | Test Method |
| Resistance T.C.R. | Within specified tolerance | +25C/+125C, Measuring points are at 10mm 1mm from the end cap. |
| Overload (Short time) | (2% +0.1) (for 5%), 1% (for 1%) | Rated voltage x 2.5 for 5 seconds |
| Resistance to Solder Heat | 1% (for 5%), 0.5% (for 1%) | 260C 5C, 10 seconds OR 350C 10C, 3.5 seconds |
| Rapid Change of Temperature | 1% (for 5%), 0.5% (for 1%) | -55C (30 minutes), +155C (30 minutes), 5 cycles |
| Terminal Strength | No lead-coming off and loose terminals | Twist 360C, 5 times |
| Resistance to Solvent | No abnormality in appearance. Marking shall be easily legible | Ultrasonic washing with isopropyl alcohol for 2 minutes. Power: 0.3W/cm3, f: 28kHz, Temp: 35C 5C |
| Flame Retardant | No evidence of flaming or self-flaming | Flame test: applied and removed for 15 seconds each, repeated 5 times. Overload flame retardant: AC voltage corresponding to 2, 4, 8, 16 and 32 times power rating applied for 1 minute until disconnection, not exceeding 4 times max operating voltage. |
| Moisture Resistance | (5%+0.1) (for 5%), 2.5% (for 1%) | 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle |
| Endurance at 70C | (5%+0.1) (for 5%), 2.5% (for 1%) | 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle |
