| General Information | - Part Name: MULTILAYER CERAMIC CAPACITORS
- Series: General Purpose Series (4V~63V)
- Specification: 0201 ~ 1210 Size
- Supplier: Suining Hongming Huaci Technology Co., Ltd.
- Issue Date: 20201116
|
| Features | - Wide selection of sizes: 0201 to 1210 available.
- High capacity achievable in small size.
|
| Applications | - General digital circuits
- Power supply bypass capacitors
- Consumer electronics
- Telecommunication industry
|
| How to Order (Example Structure) | HGC [Size] [Dielectric] [Capacitance] [Tolerance] [Rated Voltage] [Termination] [Packaging] [Thickness Code] [Reel Size] |
| Dielectric Characteristics | | Dielectric | Reference Temperature Point | Temperature Coefficient | Operation Temperature Range | | C0G | 20C | 30 ppm/ | -55C125C | | C0H | 20C | 60 ppm/ | -55C125C | | X7R | 20C | 15% | -55C125C | | X5R | 20C | 15% | -55C85C | | X7S | 20C | 22% | -55C125C | | X6S | 20C | 22% | -55C105C | |
| Product Dimensions (Example: 0201) | | Size (Inch/mm) | Length L (mm) | Width W (mm) | Thickness T (mm)/Symbol | Termination Width MB (mm) | | 0201 (0603) | 0.600.03 | 0.300.03 | 0.300.03 C | 0.150.05 | | 0402 (1005) | 1.000.05 | 0.500.05 | 0.500.05 E | 0.250.10 | | 0603 (1608) | 1.600.20 | 0.800.20 | 0.800.20 H | 0.400.15 | | 0805 (2012) | 2.000.20 | 1.250.20 | 0.700.10 G / 0.800.20 H / 1.250.20 L | 0.500.20 | | 1206 (3216) | 3.200.20 | 1.600.20 | 0.700.10 G / 0.800.20 H / 1.000.10 J / 1.250.20 L / 1.600.20 P | 0.600.20 | | 1210 (3225) | 3.200.30 | 2.500.30 | 1.250.20 L / 1.600.20 P / 2.000.20 U / 2.500.30 V | 0.750.25 | |
| Packaging Standard Quantity | | Size (Inch/mm) | Thickness (mm)/Symbol | Paper Tape (7" reel) | Plastic Tape (7" reel) | | 0201 (0603) | 0.300.03 C | 15,000 | - | | 0402 (1005) | 0.500.05 E | 10,000 | - | | 0603 (1608) | 0.800.20 H | 4000 | - | | 0805 (2012) | 0.700.10 G / 0.800.20 H | 4000 | - | | 1206 (3216) | 0.700.10 G / 0.800.20 H | 4000 | - | | 1210 (3225) | 1.250.20 L / 1.600.20 P / 2.000.20 U / 2.500.30 V | - | 2000 / 1000 | |
| Capacitance Range and Rated Voltage (Example: C0G/C0H) | | Dielectric | Size | Rated Voltage (VDC) | Capacitance | | C0G, C0H | 0201 | 16, 25, 50 | 0.3pF to 0.022F | | 0402 | 25, 50 | 0.3pF to 0.022F | | 0603 | 25, 50 | 0.3pF to 0.022F | | 0805 | 10, 16, 25, 50 | 0.3pF to 0.022F | | 1206 | 10, 16, 25, 50 | 1.2pF to 0.10F | | 1210 | 10, 16, 25, 50 | 1.2pF to 0.10F | |
| Capacitance Range and Rated Voltage (Example: X7R) | | Dielectric | Size | Rated Voltage (VDC) | Capacitance | | X7R | 0201 | 6.3, 10, 16, 25, 50 | 100pF to 0.10F | | 0402 | 6.3, 10, 16, 25, 50 | 100pF to 0.10F | | 0603 | 6.3, 10, 16, 25, 50 | 100pF to 0.10F | | 0805 | 6.3, 10, 16, 25, 50 | 100pF to 1.0F | | 1206 | 10, 16, 25, 50 | 0.12F to 1.0F | | 1210 | 10, 16, 25, 50 | 0.082F to 47F | |
| Reliability Test - Appearance and Electrical Performance | | No. | Item | Technical Requirements | Test Method | | 1 | Appearance | No remarkable defects or abnormalities. | Through microscope (10) | | 2 | Size | Within the specified size range. | Using a vernier caliper. | | 3 | Capacitance | Should be within the specified tolerance. | Test Temperature: 253C. Test Conditions vary by dielectric type and capacitance value. | | 4 | Dissipation Factor (DF, tan) | Specified limits based on dielectric type, voltage, and capacitance. | Test Temperature: 253C. Test Conditions vary by dielectric type and capacitance value. | | 5 | Insulation Resistance (IR) | Specified minimum values based on dielectric type and capacitance. | Measuring voltage, duration, test temperature, and humidity are specified. | | 6 | Dielectric Withstanding Voltage (DWV) | No breakdown or damage. | Measuring voltage: 300% Rated voltage (Class I); 250% Rated voltage (Class II). Duration: 1~5s. | | 7 | Solderability | At least 95% of the terminal electrode is covered by new solder. No visible damage. | Preheating, soldering temperature, and duration specified for leaded and lead-free solder. | | 8 | Termination Adhesion | No visible damage. | Applied force and time specified by size. | | 9 | Resistance to Soldering Heat | Electrical performance and appearance requirements specified. | Preheating, soldering temperature, duration, and recovery time specified. | | 10 | Resistance to Flexure of Substrate (Bending Strength) | C/C 10%; No visible damage. | Test board, flexure, holding time, and pressurization speed specified. | | 11 | Moisture Resistance (Steady State) | C/C and DF limits specified. IR and appearance requirements specified. | Temperature, humidity, duration, and recovery time specified. | | 12 | Temperature Cycle | C/C limits specified. | Pretreatment, cycling steps (temperature and time), and recovery time specified. | | 13 | Durability | C/C, DF, IR, and appearance requirements specified. | Applied voltage, duration, temperature, and recovery time specified. | |
| Storage Methods | - Guaranteed solderability period: 6 months (under delivered package condition).
- Storage Conditions:
- Temperature: 5C ~ 40C
- Relative Humidity: 20% ~ 70%
|
| Precautions For Use | - MLCCs may fail in short or open circuits. Severe conditions beyond ratings may cause fire, burning, or explosion. Follow specifications and contact technical department for clarification.
- Soldering Conditions: Follow recommended temperature profile graphs to avoid cracking or explosion due to sudden temperature changes.
- Manual Soldering: Handle with care to avoid thermal shock, damage, or accidents. Pay attention to soldering iron tip selection and temperature control.
- Optimum Solder Amount: Ensure appropriate solder amount to avoid chip damage (too much) or poor connection (too little).
- Recommended Soldering Temperature Profile: Refer to provided graphs for Reflow Soldering (Leaded and Lead-free) and Wave Soldering.
- Hand Soldering Conditions: Preheating (130C), Iron tip temperature (max 350C), Power (max 20W), Diameter (1mm recommended), Soldering time (max 3s), Solder paste amount (1/2 chip thickness). Avoid direct contact between soldering iron head and ceramic components.
|
| Typical Characteristic Data Graph | - |Z|-Frequency Characteristics Curve
- Temperature Characteristics
- DC Bias Characteristics
Note: The above product characteristics are for reference only. |
