| Taper | Linear | Linear, Logarithmic, Antilogarithmic |
| Range of values | 1K Rn 1M | 100 Rn 5M |
| Standard tolerance | 30% (100 Rn 1M) | 20% (1K Rn 5M), 30% (100 Rn 1M) |
| Max. Voltage | 200 Vdc | 200 Vdc (Lin), 100 Vdc (Log, Alog) |
| Nominal power @ 50C (122F) | 0.15 W | n/a |
| Nominal power @ 70C (158F) | n/a | 0.33 W |
| Residual resistance | 0.5% Rn (5 min.) |
| Equivalent noise resistance | 3% Rn (3 min.) |
| Operating temperature | -40C to +85C (-13F to +158F) | -40C to +90C (-40F to +194F) |
| Life cycles | Up to 10,000 | Up to 10,000 |
| Mechanical rotation angle | 235 5 |
| Electrical rotation angle | 220 20 |
| Torque | 0.4 to 2 Ncm (0.6 to 2.7 in-oz) |
| Rotational Stop | > 5 Ncm (>7 in-oz) |
| Electrical life (typical test) | 1,000h at 50C; 0.15W (10%) | 1,000h at 70C; 0.33W (5%) |
| Mechanical life (typical test) | 1000 cycles at 10 to 15 cpm (10%) | 1000 cycles at 10 to 15 cpm (3%) |
| Temperature coefficient (typical test) | 1.500 ppm/C (-40C; +90C) | 1.000 ppm/C (-40C; +85C) |
| Thermal cycling (typical test) | 5% (16h at 90C and 2h at -40C) | 2.5% (16h at 90C and 2h at -40C) |
| Damp heat (typical test) | 15% (500h at 40C and 95% RH) | 5% (500h at 40C and 95% RH) |
| Vibration (typical test) | 3% (2h each plane at 10Hz - 55Hz) | 2% (2h each plane at 10Hz - 55Hz) |
| Storage (typical test) | 5% (6 month at 23C 2C and 50% RH) | 5% (6 month at 23C 2C and 50% RH) |
| Detents | Up to 16 mechanical detents | Up to 16 mechanical detents |
| Wiper Position | Initial, 50%, or fully clockwise | Initial, 50%, or fully clockwise |
| Mounting Method | Vertical adjust (V50, V60 with centering pins), Horizontal adjust (H40) | Vertical adjust (V50, V60 with centering pins) |
| Standard Configuration Life | 1,000 cycles | 1,000 cycles |
| Standard Configuration Non-flammable plastic | No | Yes |
| Standard Configuration Packaging | Reel | Reel |
| Standard Configuration Wiper Position | Initial | Initial |
| Standard Configuration Housing color | Dark grey | Brown |
| Standard Configuration Rotor color | Dark grey | Brown |
| Standard Configuration Torque | 0.4 to 2 Ncm | 0.4 to 2 Ncm |
| Standard Configuration Linearity | Not controlled | n/a |
| Shafts/thumb wheels | Available separately (see PT-10 datasheet) |
