| Model Series | 3314 |
| Standard Resistance Range | 10 ohms to 2 megohms |
| Resistance Tolerance | 20 % std. (tighter tolerance available) |
| End Resistance | 1 % or 2 ohms max. (whichever is greater) |
| Contact Resistance Variation | 3 % or 3 ohms |
| Resolution | Infinite |
| Insulation Resistance | 500 vdc, 100 megohms min. |
| Dielectric Strength (Sea Level) | 500 vac (1 minute) |
| Adjustment Angle | 210 nom. |
| Power Rating @ 70 C | 0.25 watt (300 volts max. for Style G, J & H; 50 volts max. for Style R) |
| Power Rating @ 125 C | 0 watt |
| Temperature Range | -55 C to +125 C |
| Temperature Coefficient | 100 ppm/C |
| Seal Test | 85 C Fluorinert/60 seconds |
| Humidity | 90-98 % RH, 10 cycles, 240 hours (TRS 2 %; IR 10 megohms) |
| Vibration | 20 G (TRS 1 %; VRS 1 %) |
| Shock | 100 G (TRS 1 %; VRS 1 %) |
| Load Life (@ 70 C Rated Power 1000 Hours) | TRS 3 % |
| Rotational Life | 100 cycles (TRS 3 %) |
| Thermal Shock | 5 cycles (TRS 2 %; VRS 1 %) |
| Mechanical Angle | 240 nom. |
| Torque | 180 g-cm max. |
| Stop Strength | 300 g-cm min. |
| Pushover Strength (S & Z Style) | 1.6 kilograms (3.5 lbs.) min. |
| Weight | Approximately 0.01 oz. |
| Wiper Position | 50 % (Actual TR) 10 % |
| Flammability | U.L. 94V-0 |
| Standard Packaging (J, G, R) | 500 pcs./7 reel (MSL-1) |
| Standard Packaging (S, Z) | 200 pcs./7 reel (MSL-1) |
| Standard Packaging (H) | 100 pcs./tube |
| Adjustment Tool | H-90 |
| Dimension Tolerances | 0.25 mm ( .010 inches) except where noted |
| Model Indicator (-1, -2, -3, -4) | Specifies pin configuration and marking (e.g., single slot, cross slot, reverse marking) |
| Resistance Code | Standard resistance values (e.g., 100, 502, 103) |
| Embossed Tape Designator (E, G) | Specifies reel size and quantity (e.g., 500 pcs/7 reel, 3000 pcs/13 reel) |
