| Taper | Lin, Log, Alog | Lin, Log, Alog |
| Range of values | Lin: 100 Rn 5M
Log, Alog: 1K Rn 5M | Lin: 100 Rn 5M
Log, Alog: 1K Rn 5M |
| Tolerance (100 Rn 1M) | 20% | 20% |
| Tolerance (1M < Rn 5M) | 30% | 30% |
| Max. Voltage | 250 VDC (Lin)
125 VDC (Log, Alog) | 250 VDC (Lin)
125 VDC (Log, Alog) |
| Nominal power at 50C (122F) | 0.25 W (Lin)
0.12 W (Log, Alog) | 0.25 W (Lin)
0.12 W (Log, Alog) |
| Nominal power at 70C (158F) | 0.50 W (Lin)
0.25 W (Log, Alog) | 0.50 W (Lin)
0.25 W (Log, Alog) |
| Residual resistance | 0.5% Rn (5 min.) | 0.5% Rn (5 min.) |
| Equivalent noise resistance | 3% Rn (3 min.) | 3% Rn (3 min.) |
| Operating temperature | -25C to +70C | -40C to +90C |
| Mechanical rotation angle | 265 5 | 265 5 |
| Electrical rotation angle | 240 20 | 240 20 |
| Torque | 0.5 to 2.5 Ncm (0.7 to 3.4 in-oz) | 0.5 to 2.5 Ncm (0.7 to 3.4 in-oz) |
| Rotational Stop | > 10 Ncm (>14 in-oz) | > 10 Ncm (>14 in-oz) |
| Life (Cycles) | Up to 100,000 | Up to 10,000 |
| Detents | Up to 38 | Up to 38 |
| SPDT Switch version | Available | Available |
| Low torque version | Available | Available |
| Wiper position | Initial, 50%, Fully clockwise | Initial, 50%, Fully clockwise |
| Electrical life test (1000h at 50C; 0.15W) | R(%) 5% | n/a |
| Electrical life test (1000h at 70C; 0.33W) | n/a | R(%) 2% |
| Mechanical life test (1000 cycles at 10 to 15 cpm) | R(%) 3% (Rn < 1M) | R(%) 2% (Rn < 1M) |
| Temperature coefficient (-25C; +70C) | 300 ppm/C (Rn < 100K) | n/a |
| Temperature coefficient (-40C; +90C) | n/a | 100 ppm/C (Rn < 100K) |
| Thermal cycling test (16h at 85C and 2h at -25C) | R(%) 2.5% | n/a |
| Thermal cycling test (16h at 90C and 2h at -40C) | n/a | R(%) 2% |
| Damp heat test (500h at 40C and 95% RH) | R(%) 5% | R(%) 2% |
| Vibration test (2h each plane at 10Hz - 55Hz) | R(%) 2% | R(%) 2% |
| Storage test (6 month at 23C 2C and 50% RH) | R(%) 2.5% | R(%) 2% |
