| Electrical Rotation Angle | 2 | Rotational stop 0.4 to 2 Ncm. (0.6 to 2.7 in-oz) |
| Torque | > 5 Ncm. (>7 in-oz) | |
| Mechanical Rotation Angle | 1 235 5 / 2 220 20 | |
| Life | Up to 100K cycles | |
| Range of values | 100 to 5M | Decad. 1.0 - 2.0 - 2.2 - 2.5 - 4.7 - 5.0 |
| Tolerance | 20% / 30% | |
| Max. Voltage | 200 VDC (lin) / 100 VDC (no lin) | |
| Nominal Power | 0.15 W (lin) / 0.07 W (no lin) | @ 50C (122F) |
| Taper | Linear; Log; Alog. | Log. & Alog. only Rn 1K |
| Residual Resistance | 0.5% Rn (5 min.) | |
| Equivalent Noise Resistance | 3% Rn (3 min.) | |
| Operating Temperature | -25C to +70C (-13F to + 158F) | Up to 85C depending on application. |
| 360 version available | ST10 | |
| 333 version available | ST10 | |
| Wiper position | Initial, 50%, Final | Also upon request |
| Packaging | Magazines for automatic insertion | Available |
| Cut track option | Open circuit | Available |
| Mechanical detents | Available | |
| Low torque version | Available | |
| Special switch option | Available | |
| 3% Linearity | 100K cycles mechanical life | |
| Mounting methods | H (vertical mounting horizontal adjustment), V (horizontal mounting vertical adjustment) | Various options like H01, H02, H05, H07, H10, V05, V10, V11, V13 |
| Rotors | B, G, K, L, M, R, W, X, Y, Z | Thru-hole. Without shaft or knob. |
| Dimensions | 10mm | Refer to detailed diagrams for specific mounting methods |
| Standard mechanical life | 500 cycles | |
| Long life versions | Up to 10K cycles | Potentiometers with 1 to 3 detents |
| Detent torque | 1.2 to 2.5 times standard torque | |
| Stepped outputs | Available | Constant voltage zones for precise control |
| Switch version power rating | 24V / 15mA | |
| Switch version insulation resistance | 30 M | |
| Switch version ON position resistance | < 5 | |
| Packaging options | Bulk, Magazines | Units per box vary based on configuration |
