Product Overview
The PT06-K-V is a general-purpose carbon-based potentiometer designed for voltage adjustment applications. It features a rotatable shaft with a specified effective stroke and angle, offering a range of resistance values and tapers. This potentiometer is suitable for use in various electronic circuits where variable resistance is required.
Product Attributes
- Product Name: PT06-K-V
- Type: General grade carbon potentiometer (single turn)
- Origin: Not specified
- Material: Not specified (uses polycarbonate-based synthetic resin)
- Color: Not specified
- Certifications: Not specified
Technical Specifications
| Item | Specification | Unit |
|---|
| ELECTRICAL CHARACTERISTICS | | |
| Total Resistance | __ | K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | Linear (B), Other Linear | |
| Power Rating | 0.1W (Linear B), 0.05W (Other Linear) | |
| Max. operating Voltage | 100V DC (Linear B), 50V DC (Other Linear) | |
| Residual Resistance | 10 (R1-2), 10 (R2-3) | |
| Insulation Resistance | 100 M | at DC 100 V |
| Effective stroke of resistance | 215 5 | |
| Rotational Noise | 100 mV | |
| Withstanding Voltage | 100 V | at DC, 1 Minute |
| MECHANICAL CHARACTERISTICS | | |
| Dimensions | Refer to the separate product chart | |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| Shaft Stop Strength | 0.5kgf.cm min | |
| DURABILITY CHARACTERISTICS | | |
| Rotational Life | 10,000 cycles | |
| Working Temperature | -25 ~ +70 | |
| Storage Temperature | -25 ~ +80 | |
| Soldering Heat Characteristic | Auto Soldering: 2605 (31 sec), Manual Soldering: 2805 (31 sec) | |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
|---|
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 | | |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as polycarbonate-based synthetic resins are used.
Use of flux: Avoid water-soluble flux during soldering to prevent adverse effects on materials.
Soldering: Avoid designs where molten solder flows over the PC board surface to prevent poor contact.
Recommended circuit configuration: Recommended for voltage adjustment (Fig. A). When used for current adjustment (Fig. B), confirm performance under actual operating conditions.
Residual Resistance: Standard products have a sulfurization-resistant film over silver electrodes. Contact for low residual resistance requirements.
Dew condensation: Avoid use in conditions with dew or water drops to prevent insulation deterioration or short circuits.
Low Temperature Operation: Customized products for smooth rotary movement in low-temperature environments are available upon request.
2512011519_BOCHEN-PT06-K-V-503-50K_C5205077.pdf
|
|
General grade carbon potentiometer BOCHEN PT06-K-V-503 50K suitable for variable resistance circuits Images
|
