| General Information | Usage Environment Temperature | -10+70 or -20+70 |
| Storage Environment Temperature | -40+85 |
| Test Condition | Temperature: 5~35, Humidity: 45~85%HR |
| Soldering Heat-Resistance | Manual: Max 3505 at 3 sec; Auto: Max 2605 at 3 sec. Preheating: Max 100 at within 1 min. |
| Mechanical Characteristics | Total Rotational Angle | 30010 |
| Rotational Torque | 10~200gf.cm (Rotational velocity: 60/1 Sec.) |
| Detent Torque | 80~250gf.cm |
| Detent Quantity | 0, 1, 21, 41 |
| Rotational Stopper Strength | 3Kgf.cm, 8Kgf.cm, 4Kgf.cm, 5Kgf.cm |
| Shaft Wobble | < 0.7*shaft long L size/20mm (at 250gf on shaft tip) |
| Electrical Characteristics | Total Resistance | 10 K20% or other values |
| Resistance Taper | A (Linear) |
| End Resistance | R10K: 10; 10KR250K: 20; R250K: 0.1%R |
| Ratings Power | Linear: 0.05W, Other taper: 0.025W |
| Maximum Operating Voltage | Linear: 20V DC or 50V AC; Other taper: 12V DC or 25V AC |
| Slider Noise | <100mV |
| Gang Error | 4dB or 3dB (-40dB~0dB) (for Dual-Unit only) |
| Insulation & Voltage Proof | Insulation Resistance | >100M at 250V DC |
| Voltage Proof | 300V AC for 1 minute |
| Rotational Life | 10,000 cycles, 15,000 cycles, or 30,000 cycles (15% resistance change max. at 600 cycles/hr without load) |
| Switch Characteristics | Applicable | Yes / No |
| Switch Type | Rotary type or Push-Push type |
| Switch Circuit | S.P.S.T |
| Switch Ratings Power | Rotary: 12V DC 1A; Push-Push: 12V DC 0.5A |
| Switch Contact Resistance | Initial: 100 m max.; After 10,000 cycles: 1 max. |
| Switch Working Angle/Track | Rotary: 5010; Push-Push: 0.5mm or 1.5mm |
| Waterproof Characteristics | Waterproof Standard | Grade -7 (Potentiometer shaft/bush in 1M water depth for 30 min, other parts sealed) or Not Applicable |
