| 1 General Information | Applicable Models | Potentiometer Series | R095, R096, R097, R098, R09J, R09P, R09B |
| Usage Environment Temperature | -10+70 or -20+70 | |
| Storage Environment Temperature | -40+85 | |
| Test Condition | Temperature: 5~35, Moisture: 45~85%HR | |
| 2 Construction | Appearance | Complete, no rust, cracks, or bad plating | |
| Dimensions | As per design drawing | |
| Country of Origin | China | |
| 3 Mechanical Characteristics | Total Rotational Angle | 30010 | |
| Rotational Torque | 10~200gf.cm (Rotational velocity: 60/1 Sec.) | |
| Detent Torque | 80~250gf.cm | |
| Detent Quantity | 0, 1, 21, 41 | |
| Rotational Stopper Strength | 3Kgf.cm, 8Kgf.cm, 4Kgf.cm, 5Kgf.cm | |
| Shaft Push-Pull Strength | 8Kgf, 10Kgf | |
| Nut Tightening Strength | 10Kgf.cm | |
| Shaft Wobble | On the tip of the single shaft exert 250gf, Shaft radial deviant be smaller than: 0.7*shaft long L size/20mm | |
| 4 Electrical Characteristics | Total Resistance | Various values with 20%, 10%, or +%/-% tolerance | e.g., 10 K10% |
| Resistance Taper | A, B, C | |
| End Resistance (Terminal: 1-2, 2-3) | R10K: 10; 10K R250K: 20; R250K: 0.1%R | |
| Ratings Power | B Taper: 0.05W, Other taper: 0.025W | |
| Maximum Operating Voltage | B Taper: 20V DC or 50V AC, Other taper: 12V DC or 25V AC | |
| Slider Noise | <100mV | |
| Gang Error | 4dB (-40dB~0dB) or 3dB (-40dB~0dB) (Dual-Unit only) | |
| Insulation Resistance | 250V DC, >100M | |
| Voltage Proof | 300V AC for 1 Minute | |
| Rotational Life | 10,000 cycles, 15,000 cycles, 30,000 cycles | On without load, 600 r./h rotation, permissible resistance change 15% max. |
| 5 Switch Characteristics | Apply | Yes/No | |
| Switch Type | Rotary Type | |
| Switch Circuit | Single Pole Single Throw (S.P.S.T.) | |
| Switch Ratings Power | 12V DC 1A (for Rotary Switch) | |
| Switch Contact Resistance | Initial stage: 100 mmax., after 10,000 cycles: 2 max. | |
| Switch Working Angle | 5010 (for Rotary Switch) | |
| Switch Working Torque | 800gf.cm max. (for Rotary Switch) | |
| Switch Life | 10,000 cycles | |
| 6 Waterproof Characteristics | Waterproof Standard | Grade -7 | Potentiometer's Shaft and Bush in 1M deep of water, other component sealed, exposed to standard atmosphere for 30 minutes, no water ingress. |
