| General Information | Usage Environment Temperature | -10+70 / -20+70 | Selectable |
| Storage Environment Temperature | -20+70 / -40+70 | Selectable |
| Test Conditions | Temperature: 5~35, Humidity: 45~85%RH | |
| Soldering Heat-Resistance | Hand Soldering: Max 3505, 3 sec
Auto Soldering: Max 2605, 3 sec
Preheating: Max 100, within 1 min | Process guaranteed for 1-2 times |
| Construction | Appearance | Complete, no rust, cracks, or plating defects | |
| Dimensions | As per design drawing | |
| Mechanical Characteristics | Total Rotational Angle | 3005 | |
| Rotational Torque | 30~150 gf.cm | Rotational velocity: 60/1 sec |
| Detent Torque | 50~200 gf.cm | |
| Detent Quantity | 0 / 1 / 41 | Selectable |
| Rotational Stopper Strength | 6 Kgf.cm | |
| Pull-Push Strength of Shaft | 10 Kgf | |
| Nut Tightening Strength | 10 Kgf.cm | |
| Electrical Characteristics | Total Resistance | K20% / 50 K10% / K+ %/- % | Selectable |
| Resistance Taper | A / B / C | Selectable |
| End Resistance (Terminal 1-2, 2-3) | 10 (R10K); 20 (10KR250K); 0.1%R (R250K) | |
| Rated Power | 0.1W (B Taper); 0.05W (Other taper) | |
| Maximum Operating Voltage | 20V DC or 150V AC | |
| Slider Noise | 100mV | |
| Gang Error | 4dB / 3dB (-40dB~0dB) | Applies to Dual-Unit only |
| Insulation Resistance | 100M (at 500V DC) | |
| Voltage Proof | 500V AC for 1 minute | |
| Switch Characteristics | Applicable | Yes / No | Selectable |
| Switch Type | Rotary Type | |
| Switch Circuit | Single Pole Single Throw (S.P.S.T) | |
| Switch Rated Power | 12V DC 1A | |
| Switch Contact Resistance | 100 m max. (initial); 1 max. (after 10,000 cycles) | |
| Switch Working Angle/Track | 5010 | |
| Waterproof Characteristics | Standard | No Apply / Grade -7 | Selectable |
| Grade -7 Details | Shaft/Bush in 1M water, sealed components in atmosphere for 30 min, no water ingress | |
