Product Overview
This document details the specifications for the PT06-K-V, a general-grade carbon element potentiometer. It outlines electrical, mechanical, and durability characteristics, along with usage precautions and a resistance code table. Suitable for applications requiring precise resistance adjustment.
Product Attributes
- Product Name: PT06-K-V
- Product Type: General Grade Carbon Element Potentiometer (Single Turn)
Technical Specifications
| Item | Specification | Content |
| 1 ELECTRICAL CHARACTERISTICS | 1.1 Total Resistance | __K |
| 1.2 Total Resistance Tolerance | 20% |
| 1.3 Resistance Taper | taper |
| 1.4 Power Rating | 0.1W (Linear), 0.05W (Other Linear) |
| 1.5 Max. operating Voltage | 100V DC (Linear), 50V DC (Other Linear) |
| 1.6 Residual Resistance | R1-2 10 ; R2-3 10 |
| 1.7 Insulation Resistance | 100 M at DC 100 V |
| 1.8 Effective stroke of resistance | 215 5 |
| 1.9 Rotational Noise | 100 mV |
| 2 MECHANICAL CHARACTERISTICS | 2.1 Dimensions | Refer to the separate product chart |
| 2.2 Total Rotational Angle | 235 10 |
| 2.3 Rotational Torque | 10 ~ 150 gf.cm |
| 2.4 Shaft Stop Strength | 0.5kgf.cm min |
| 3 DURABILITY CHARACTERISTICS | 3.1 Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise: 150mV) |
| 3.2 Working Temperature | -25 ~ + 70 |
| 3.3 Storage Temperature | -25 ~ + 80 |
| 3.4 Soldering Heat Characteristic | Auto Soldering | 2605 ; time31 sec |
| Manual Soldering | 2805 ; time31 sec |
Resistance Code Table
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 | | |
Precautions
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons, as polycarbonate resins are used.
Use of flux: Avoid water-soluble flux to prevent adverse effects on materials.
Soldering: Prevent solder from flowing onto the upper surface of the PC board to avoid poor contact.
Recommended circuit configuration: Recommended for voltage adjustment (Fig. A). If used for current adjustment (Fig. B), confirm under actual operating conditions.
Residual Resistance: For low residual resistance requirements, contact the manufacturer. A sulfurization-resistant film is applied over silver electrodes.
Dew condensation: Avoid use in conditions where dew or water drops may occur on the resistor surface to prevent insulation deterioration or short circuits.
Low Temperature Operation: For low-temperature environments, customized products with comfortable feel can be provided upon request.
2512011519_BOCHEN-PT06-K-V-203-20K_C5205076.pdf
|
|
Single turn carbon element potentiometer BOCHEN PT06-K-V-203 20K designed for resistance adjustment tasks Images
|
