Product Overview
The Si MEMS Oscillator Series 2NM is a surface mount component designed for reliable frequency generation. Featuring epoxy molding and a compact 2.5x2.0mm package, this oscillator offers a nominal frequency of 100.000MHz with LVCMOS output. It operates across a wide temperature range of -40 to 85 and supports supply voltages from 1.8V to 3.3V. Ideal for applications requiring stable and precise timing, this MEMS oscillator is manufactured by (SJK) and is RoHS, REACH, and HF compliant.
Product Attributes
- Brand: SJK ()
- Series: 2NM
- Technology: Si MEMS Oscillator
- Packaging: Epoxy Molding, Surface Mount
- Package Size: 2.5x2.0mm
- Crystal Cutting Type: AT CUT (thickness shear mode)
- Certifications: RoHS, REACH, HF
- Minimum Packaging: 3000pcs/reel
- Moisture Sensitivity Level: Level 1
Technical Specifications
| Parameter | Symbol | Min | Type | Max | Units | Notes |
| Nominal Frequency | | | 100.000000 | | MHz | |
| Frequency Stability AT 25 | | | 10 | | PPM | |
| Frequency Stability Over Operating Temperature range | | | 15 | | PPM | |
| Operating Temperature | Topr | -40 | 25 | 85 | | |
| Storage Temperature | Tstg | -55 | | 125 | | |
| Supply Voltage | VDD | 3.3 10% | | | V | 1.62~3.63V |
| Input Current | Icc | | | 10 | mA | |
| Enable Control | | | Yes | | | Pad1 |
| Output Load : CMOS | CL | | 15 | | pF | |
| Output Voltage High | VoH | 90% | | | Vdd | V |
| Output Voltage Low | VoL | 10% | | | Vdd | V |
| Rise Time | Tr | | 5 | | ns | 10%90%VDD Level |
| Fall Time | Tf | | 5 | | ns | 90%10%VDD Level |
| Symmetry (Duty ratio) | TH/T | 45 | ~ 55 | % | | |
| Start-up Time | Tosc | | 10 | | ms | |
| Enable Voltage High | Vhi | 70% | | | Vdd | V |
| Disable Voltage Low | Vlo | 30% | | | Vdd | V |
| Aging | | 3 | ppm/yr. | | | 1st. Year at 25 |
| Output Disable Delay Time | T off | | 150 | | us | |
| Output Enable Delay Time | T on | | 150 | | us | |
| Phase Jitter (12KHZ~20MHZ) | | 0.5 | ~ 1.0 | ps | | |
Dimensions
Units: mm
2.5 x 2.0
Test Conditions
Standard atmospheric conditions: Ambient temperature: 255, Relative humidity: 40%~70%.
Measurement limits: Ambient temperature: 253, Relative humidity: 40%~70%.
Measurement equipment: MD 37WX-05M or equivalent.
Test Circuit Description
Control input (output enable/disable): Logic 1 or open on pad 1 enables the oscillator output. Logic 0 on pad 1 disables the output to high impedance.
Waveform Conditions
Waveform measurement system should have a minimum bandwidth of 5 times the frequency being tested.
Output Enable / Disable Delay
The device timing during normal operation is shown in the figure. When the device is in standby, the oscillator stops. Upon release from standby, the oscillator starts and provides a stable output after a short delay.
Suggested Reflow Profile
Total time: 200 sec. Max / Solder melting point: 220
Reliability Test Specification
1. Mechanical Endurance
| Test Item | Test Methods REF. DOC |
| Drop Test | 75 cm height, 3 times on concrete floor. JIS C6701 |
| Mechanical Shock | Device shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time MIL-STD-202F |
| Vibration | Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes. Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs) MIL-STD-883E |
| Gross Leak | Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2 MIL-STD-883E |
| Fine Leak | Helium Bombing 4.5 kgf / cm 2 for 2 Hrs |
| Solderability | Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds. Flux Rosin resin methyl alcohol solvent (1 : 4) MIL-STD-883E |
2. Environmental Endurance
| Test Item | Test Methods REF. DOC |
| Resistance To Soldering Heat | Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec. Test temperature 260 5 , Test time 10 1 sec. MIL-STD-202F |
| High Temp. Storage | +125 3 for 1000 12Hrs MIL-STD-883E |
| Low Temp. Storage | -40 3 for 1000 12Hrs |
| Thermal Shock | Total 100 cycles of the following temperature cycle MIL-STD-883E |
| Pressure Cooker Storage | 121 3, RH100%, 2 bar, 240Hrs JIS C6701 |
| High TempHumidity | 85 3, RH 85%, 1000Hrs JIS C5023 |
2304131800_SJK-2NM100000C33YC_C668758.pdf
|
|
Si MEMS oscillator surface mount epoxy molding package 2.5x2.0mm frequency 100 MHz SJK 2NM100000C33YC Images
|
