Product Overview
The Si MEMS Oscillator Series 1NM is a surface mountable, epoxy-molded oscillator designed for various electronic applications. It operates within a wide temperature range and offers a stable output frequency, making it suitable for demanding environments. The device features an enable/disable function for power management and is compliant with RoHS, REACH, and HF standards.
Product Attributes
- Brand: SJK
- Series: 1NM
- Technology: MEMS Oscillator
- Packaging: Epoxy Molding, Surface Mount
- Package Size: 2.0x1.6mm
- Certifications: RoHS, REACH, HF
- Moisture Sensitivity Level: Level 1
- Minimum Packaging: 3000pcs/reel
Technical Specifications
| Parameter | Symbol | Min | Type | Max | Units | Notes |
| Nominal Frequency | | | 100.000000 | | MHZ | |
| Frequency Stability AT 25 | | | 10 | | PPM | |
| Frequency Stability Over Operating Temperature range | | | 15 | | PPM | |
| Operating Temperature | Topr | -40 | 25 | 85 | | |
| Storage Temperature | Tstg | -55 | | 125 | | |
| Supply Voltage | VDD | 3.3 | | 10% (1.62~3.63V) | V | |
| Input Current | Icc | | | 10 | mA | |
| Enable Control | | | Yes | | | Pad1 |
| Output Load: CMOS | CL | | 15 | | pF | |
| Output Voltage High | VoH | 90% | | | Vdd V | |
| Output Voltage Low | VoL | 10% | | | Vdd V | |
| Rise Time | Tr | | 5 | | ns | 10%90%VDD Level |
| Fall Time | Tf | | 5 | | ns | 90%10%VDD Level |
| Symmetry (Duty ratio) | TH/T | 45 | ~ 55 | % | | |
| Start-up Time | Tosc | | 10 | | ms | |
| Enable Voltage High | Vhi | 70% | | | Vdd V | |
| Disable Voltage Low | Vlo | 30% | | | Vdd V | |
| Aging (1st. Year at 25) | | 3 | | | ppm/yr. | |
| Output Disable Delay Time | T off | | 150 | | us | |
| Output Enable Delay Time | T on | | 150 | | us | |
| Phase Jitter (12KHZ~20MHZ) | | 0.5 | ~ 1.0 | ps | | |
Dimensions
Units: mm
2.0 x 1.6
Test Conditions
Standard atmospheric conditions: Ambient temperature 255, Relative humidity 40%~70%.
Measurement within limits: Ambient temperature 253, Relative humidity 40%~70%.
Measurement equipment: MD 37WX-05M or equivalent.
Crystal Cutting Type
AT CUT (thickness shear mode)
Output Enable/Disable Functionality
Control input (output enable/disable):
- Logic 1 or open on pad 1: Oscillator output enabled.
- Logic 0 on pad 1: Disable output to high impedance.
When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.
Reliability Test Specifications
Mechanical Endurance:
- Drop Test: 75 cm height, 3 times on concrete floor (REF. DOC: JIS C6701).
- Mechanical Shock: Half sine wave (1000 G), 0.5m sec. duration time, 3 times each on three mutually perpendicular axes (REF. DOC: MIL-STD-202F).
- Vibration: Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes per axis, 4 Hrs per axis (Total test time 12 Hrs) (REF. DOC: MIL-STD-883E).
- Gross Leak: Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2 (REF. DOC: MIL-STD-883E).
- Fine Leak: Helium Bombing 4.5 kgf / cm2 for 2 Hrs.
- Solderability: Temperature 245 5, Immersion depth 0.5 mm minimum, Immersion time 5 1 seconds, Flux Rosin resin methyl alcohol solvent (1:4) (REF. DOC: MIL-STD-883E).
Environmental Endurance:
- Resistance To Soldering Heat: Pre-heat temperature 125 (60~120 sec.), Test temperature 260 5 (10 1 sec.) (REF. DOC: MIL-STD-202F).
- High Temp. Storage: +125 3 for 1000 12Hrs (REF. DOC: MIL-STD-883E).
- Low Temp. Storage: -40 3 for 1000 12Hrs (REF. DOC: MIL-STD-883E).
- Thermal Shock: Total 100 cycles of specified temperature cycle (REF. DOC: MIL-STD-883E).
- Pressure Cooker Storage: 121 3, RH100%, 2 bar, 240Hrs (REF. DOC: JIS C6701).
- High Temp & Humidity: 85 3, RH 85%, 1000Hrs (REF. DOC: JIS C5023).
Suggested Reflow Profile
- Total time: 200 sec. Max
- Solder melting point: 220
2304131800_SJK-1NM100000C33YC_C668735.pdf
|
|
Stable Frequency MEMS Oscillator SJK 1NM100000C33YC Surface Mount Device for Electronic Applications Images
|
