Sign In | Join Free | My infospaceinc.com
China Beijing Silk Road Enterprise Management Services Co., Ltd. logo
Beijing Silk Road Enterprise Management Services Co., Ltd.
Beijing Silk Road Enterprise Management Services Co.,Ltd.
Verified Supplier

1 Years
Home > Common Mode Chokes >

Common Mode Choke SOREDE SRCM.4532.510NT00 Featuring 51uH Inductance and 200mA Maximum Rated Current

Product Categories
Beijing Silk Road Enterprise Management Services Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

Common Mode Choke SOREDE SRCM.4532.510NT00 Featuring 51uH Inductance and 200mA Maximum Rated Current

Inductance @ Frequency : 51uH@100kHz

Impedance @ Frequency : 2.8kΩ@10MHz

Voltage Rating - DC : 50V

Number of Lines : 2

DC Resistance(DCR) : 1Ω

Operating Temperature : -25℃~+105℃

Current Rating : 200mA

Description : 51uH@100kHz 2Line Common Mode Choke Surface Mount-4P 4.5x3.2mm 2.8kΩ@10MHz 200mA DCR 1Ω

Mfr. Part # : SRCM.4532.510NT00

Model Number : SRCM.4532.510NT00

Package : SMD-4P,4.5x3.2mm

Contact Now

Product Overview

This document is an acknowledgement for the Common Mode Choke, model SRCM.4532.510NT00, manufactured by Shenzhen Sorvida Electronics Co., Ltd. It details the product's specifications, dimensions, materials, electrical characteristics, and reliability testing.

Product Attributes

  • Brand: SRD
  • Origin: Shenzhen, China
  • Product Type: Common Mode Choke

Technical Specifications

Part NumberImpedance ()[10MHz] 25%Inductance(uH) [100KHz/0.1V] +50%/-30%DCR Max.()Rated Voltage V (max.)Rated Current (mA)(max.)
SRCM.4532.510NT002800511.050200

Dimensions (mm)

ParameterValue (mm)Value (inch)
A4.50.2Ref
B3.20.2Ref
C2.80.2Ref
D11.00.1Ref
D21.20.1Ref
L4.8Ref
H3.8Ref
G12.5Ref
G20.7Ref

Materials

No.ItemMaterial
1CoreNi-Zn Ferrite
2SolderSn-0.7Cu
3WireCopper Wire P180-G1

Product Name Composition

SRCM 4532 510 N T 00

  • a: Series name
  • b: Product dimensions (A x B x C)
  • c: Inductance Value
  • d: Inductance Tolerance
  • e: Package (T: Tape/Reel, B: Bulk)
  • f: Numbering (standard)

Testing Conditions

Standard: Temperature: 5 to 35, Humidity: 25 to 85% RH, Atmospheric pressure: 86 to 106 kPa

Doubtful Measurement: Temperature: 202, Humidity: 60 to 75% RH, Atmospheric pressure: 86 to 106 kPa

Packaging

Tape Dimensions (mm)

SeriesWPP0P1
SRCM.453212.00.18.00.14.00.12.00.1

Reel Dimensions (mm)

ABCDE
178260213.50.521.00.82.00.5

Carrier Tape Dimensions (mm)

WtR
13.51.151.20.21.00.25

Cover Tape Peel Strength

  • Test Condition: 1) Peel Angle: 165~180 vs. carrier tape. 2) Peel Speed: 300 mm/min10%
  • Strength: 0.3~0.7N (30gf~70gf)

Packaging Quantity

ItemQuantity (PCS)Dimensions (mm)
Reel5007
Inner Box2000185mm*185mm*120mm
Outer Box20000395mm*385mm*205mm

Reliability Testing

1. Solder-Ability

SpecificationsTest Methods
More than 90% of termination should be covered with new solder.Solder: Sn, Temperature: 255+5/-0, Flux: rosin, Duration: 3.50.5s

2. Leaching Resistance

SpecificationsTest Methods
More than 75% of termination Should be covered with new solder.Solder: Sn, Temperature:270+2/-0, Flux: rosin, Duration: 100.5s

3. Drop

SpecificationsTest Methods
No mechanical damage shall be noticed Impedance shall be within 20% of the initial valueDrop 10 times on a concrete floor from a height of 1m.

4. Vibration

SpecificationsTest Methods
-Frequency: 10 to 55Hz, Amplitude: 1.52mm, Direction and time: X, Y and Z directions for 2 hours each.

5. Humidity Resistance

SpecificationsTest Methods
a. Test condition: Temp. 405, Humidity: 90%~95%, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.-

6. High Temperature Resistance

SpecificationsTest Methods
a. Test condition: Applied rated current, Temp. 855, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.-

7. Low Temperature Resistance

SpecificationsTest Methods
No mechanical damage shall be noticed Impedance shall be within 20% of the initial valuea. Test condition: Temp. -405, Test time: 50012hr. b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.

8. Thermal Shock

SpecificationsTest Methods
a. Test condition: 1) Temp. -40, time: 303min 2) Temp. +85, time: 303min, 100 cycles b. Measurement method: The component should be stabilized at normal condition for 24 hours before test.-

2505191720_SOREDE-SRCM-4532-510NT00_C22365302.pdf


Quality Common Mode Choke SOREDE SRCM.4532.510NT00 Featuring 51uH Inductance and 200mA Maximum Rated Current for sale

Common Mode Choke SOREDE SRCM.4532.510NT00 Featuring 51uH Inductance and 200mA Maximum Rated Current Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like