| Range of Working Temperature | -55~105 (C) |
| Capacitance | Measurement Temp: 202, Frequency: 120Hz, Voltage: 0.5Vrms. Tolerance: -20~20% |
| Dissipation Factor (tan) | Measurement Temp: 202, Frequency: 120Hz, Voltage: 0.5Vrms. See Table 1 for criterion. |
| Leakage Current | Rated voltage applied for 2 min. Criterion: I 170 (A) |
| Terminal Strength (Tensile) | Refer to datasheet for load values based on lead diameter. |
| Terminal Strength (Bending) | Refer to datasheet for load values and cycles based on lead diameter. |
| Temperature Characteristic | Impedance ratio must not exceed values in Table 2. LC 800% of initial specification. |
| High Temperature Load | 105C, Rated DC working voltage, 5000 H. Capacitance Change: 20%, DF 200% of initial, LC initial. |
| High Temperature Exposure (Storage) | 105C, No voltage, 1000 H. Capacitance Change: 20%, DF 200% of initial, LC initial. |
| Surge Test | 15~35C, 29V, 1000 cycles (30s charge, 330s discharge). Capacitance Change: 15%, DF initial, LC initial. |
| Vibration | 10~55Hz, 0.75mm amplitude, 98 m/s (10g) for 6 hours (X,Y,Z). Capacitance Change: 5%, DF initial, LC initial. |
| Solderability | Solder: Sn96.5/Ag3/Cu0.5, 2455C, 2.00.5s immersion. New tin coverage > 95%. |
| Resistance to Soldering Heat | Solder: Sn96.5/Ag3/Cu0.5, 2603C, 101s immersion. Capacitance Change: 5%, DF initial, LC initial. |
| Vent Test | (For products with vent requirement) Refer to datasheet for voltage and size criteria. No explosion, flash, flame, spark or fire. |
| Temperature Cycling | 10 cycles (refer to JIS-C-5101-1 No:4.16). Capacitance Change: 5%, DF initial, LC initial. |
| High Temp and Humidity | 402C, 90~95% RH, 500 H. Capacitance Change: 10%, DF 1.2 times initial, LC initial. |
