| Sign In | Join Free | My infospaceinc.com |
|
Lifetime : 1000hrs@105℃
Capacitance : 100uF
Height - Seated (Max) : 7mm
Voltage Rating : 16V
Pin Spacing : 2.5mm
Diameter : 6.3mm
Equivalent Series Resistance(ESR) : -
Tolerance : ±20%
Ripple Current : 95mA@120Hz
Description : 100uF 16V Aluminum Electrolytic Capacitors Through Hole,D6.3xL7mm 1000hrs@105℃
Mfr. Part # : SK101M016E070A
Model Number : SK101M016E070A
Package : Through Hole,D6.3xL7mm
| Item Performance Characteristics | Value | |
|---|---|---|
| Operating Temperature Range | -40 to +105 | |
| Rated Voltage Range | 4 to 63 VDC | |
| Capacitance Range | 0.1 to 470 F | |
| Capacitance Tolerance | 20% (120Hz, +20) | |
| Leakage Current(+20, max) | Formula | I0.01 CV or 3 (A), whichever is greater |
| Condition | After 1 minute, measured with rate working voltage applied. | |
| Dissipation Factor (tanat 20120Hz) | See table below | |
| Low Temperature Characteristics (at 120Hz) | See table below | |
| Load Life Test Conditions | Duration: 1000 Hrs, Ambient Temp: +105, Applied Voltage: Rated DC working voltage | |
| After Load Life Test Requirement at +20 | Capacitance change | 20% of initial measured value (4V: 30%) |
| Dissipation factor | 200% of initial specified value | |
| Leakage current | The initial specified value | |
| Shelf Life Test Conditions | Duration: 1000 Hrs, Ambient Temp: +105, Applied Voltage: None | |
| After Shelf Life Test Requirement at +20 | Same limits as Load life. | |
| Pre-treatment for measurements | Application of DC working voltage for 30 minutes. | |
| Working Voltage (VDC) | D.F. (%)max |
|---|---|
| 4 | 25 |
| 6.3 | 22 |
| 10 | 20 |
| 16 | 16 |
| 25 | 14 |
| 35 | 12 |
| 50 | 10 |
| 63 | 9 |
| Working Voltage (VDC) | Z-25 / Z+20 | Z-40 / Z+20 |
|---|---|---|
| 4 | 7 | 15 |
| 6.3 | 4 | 8 |
| 10 | 3 | 6 |
| 16 | 2 | 4 |
| 25 | 2 | 4 |
| 35 | 2 | 3 |
| 50 | 2 | 3 |
| 63 | 2 | 3 |
| CAP(F) | Frequency(Hz) | |||||
|---|---|---|---|---|---|---|
| 50(60) | 120 | 400 | 1K | 10K | 50K-100K | |
| CAP10 | 0.8 | 1 | 1.30 | 1.45 | 1.65 | 1.70 |
| 10CAP100 | 0.8 | 1 | 1.23 | 1.36 | 1.48 | 1.53 |
| 100CAP1000 | 0.8 | 1 | 1.16 | 1.25 | 1.25 | 1.38 |
| D | F | d |
|---|---|---|
| 4 | 1.50.5 | 0.45 |
| 5 | 2.00.5 | 0.5 |
| 6.3 | 2.50.5 | 0.5 |
| 8 | 3.50.5 | 0.5 |
| WV (SV) | Cap(F) | 4 (5) | 6.3 (8) | 10 (13) | 16 (20) | 25 (32) | 35 (44) | 50 (63) | 63 (79) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | Size | Ripple | ||
| 0.1 | 4x7 | 1.5 | 4x7 | 1.8 | 4x7 | 2.5 | 4x7 | 3.5 | 4x7 | 5 | 4x7 | 6 | 4x7 | 7 | 4x7 | 10 | |
| 0.15 | 4x7 | 1.5 | 4x7 | 1.8 | 4x7 | 2.5 | 4x7 | 3.5 | 4x7 | 5 | 4x7 | 6 | 4x7 | 7 | 4x7 | 10 | |
| 0.22 | 4x7 | 2.5 | 4x7 | 2.5 | 4x7 | 3.5 | 4x7 | 5 | 4x7 | 6 | 4x7 | 7 | 4x7 | 10 | 4x7 | 12 | |
| 0.33 | 4x7 | 3.5 | 4x7 | 3.5 | 4x7 | 5 | 4x7 | 6 | 4x7 | 7 | 4x7 | 10 | 4x7 | 12 | 4x7 | 14 | |
| 0.47 | 4x7 | 5 | 4x7 | 6 | 4x7 | 7 | 4x7 | 10 | 4x7 | 12 | 4x7 | 14 | 4x7 | 19 | 4x7 | 19 | |
| 0.68 | 4x7 | 7 | 4x7 | 7 | 4x7 | 10 | 4x7 | 12 | 4x7 | 14 | 4x7 | 19 | 4x7 | 19 | 5x7 | 25 | |
| 1 | 4x7 | 10 | 4x7 | 12 | 4x7 | 14 | 4x7 | 19 | 4x7 | 19 | 5x7 | 25 | 5x7 | 29 | 5x7 | 29 | |
| 1.5 | 4x7 | 13 | 4x7 | 14 | 4x7 | 19 | 4x7 | 19 | 5x7 | 25 | 5x7 | 29 | 5x7 | 29 | 6.3x7 | 33 | |
| 2.2 | 4x7 | 19 | 4x7 | 19 | 5x7 | 25 | 5x7 | 29 | 5x7 | 29 | 6.3x7 | 33 | 6.3x7 | 35 | 5x7 | 28 | |
| 3.3 | 4x7 | 24 | 5x7 | 25 | 5x7 | 29 | 5x7 | 29 | 6.3x7 | 33 | 6.3x7 | 35 | 5x7 | 28 | 6.3x7 | 33 | |
| 4.7 | 4x7 | 22 | 4x7 | 27 | 5x7 | 29 | 5x7 | 29 | 6.3x7 | 33 | 6.3x7 | 38 | 6.3x7 | 38 | 8x7 | 55 | |
| 6.8 | 4x7 | 24 | 5x7 | 32 | 6.3x7 | 35 | 5x7 | 28 | 6.3x7 | 33 | 6.3x7 | 45 | 8x7 | 55 | 8x7 | 68 | |
| 10 | 4x7 | 30 | 5x7 | 35 | 6.3x7 | 40 | 5x7 | 35 | 6.3x7 | 38 | 6.3x7 | 52 | 8x7 | 55 | 8x7 | 68 | |
| 15 | 5x7 | 38 | 6.3x7 | 52 | 8x7 | 55 | 6.3x7 | 45 | 8x7 | 58 | 8x7 | 63 | 8x7 | 78 | 8x7 | 80 | |
| 22 | 5x7 | 50 | 6.3x7 | 60 | 8x7 | 65 | 6.3x7 | 58 | 8x7 | 63 | 8x7 | 78 | 8x7 | 80 | 8x7 | 85 | |
| 33 | 6.3x7 | 54 | 8x7 | 78 | 8x7 | 68 | 8x7 | 80 | 8x7 | 85 | |||||||
| 47 | 8x7 | 80 | 8x7 | 85 | |||||||||||||
| 68 | 8x7 | 85 | |||||||||||||||
| 100 | 5x7 | 58 | 5x7 | 65 | 5x7 | 80 | 6.3x7 | 95 | 8x7 | 115 | 6.3x7 | 75 | 6.3x7 | 90 | 8x7 | 105 | |
| 220 | 6.3x7 | 65 | 6.3x7 | 90 | 6.3x7 | 105 | 8x7 | 120 | 8x7 | 150 | |||||||
| 330 | 6.3x7 | 90 | 8x7 | 120 | |||||||||||||
| 470 | 8x7 | 120 | |||||||||||||||
Note: For Capacitance values not listed, please refer to Engineering Bulletin No. E115.
|
|
radial capacitor CapXon SK101M016E070A designed for high density insertion in car radios and chargers Images |