| Operating Temperature Range | -40 to +105 |
| Rated Voltage Range | 6.3 to 100 VDC (for one range), 160 to 450 VDC (for another range) |
| Capacitance Range | 0.1 to 22000 F (for one range), 0.47 to 470 F (for another range) |
| Capacitance Tolerance | 20% (at 120Hz, +20) |
| Leakage Current (max.) | I0.01 CV or 3 A (after 1 min, with rated working voltage) for one range; I0.03 CV A (after 1 min, with rated working voltage) for another range. |
| Dissipation Factor (tan) | (at 20, 120Hz) For capacitance >1000F, add 2% per another 1000F. |
| Low Temperature Characteristics (at 120Hz) | Impedance ratio max: Z-25Z+20 (values vary by working voltage); Z-40Z+20 (values vary by working voltage). For Capacitance >1000 F, add 0.5 per another 1000 F for -25+20; add 1 per another 1000 F for -40+20. |
| Load Life Test | Duration: 2000Hrs, Ambient Temp: +105, Applied Voltage: Rated DC working voltage. After test requirements at +20: Capacitance change 20% of initial, Dissipation factor 200% of initial specified, Leakage current initial specified value. |
| Shelf Life Test | Duration: 1000Hrs, Ambient Temp: +105, Applied Voltage: None. After test requirements at +20: Same limits as Load life. |
| Pre-treatment for measurements | Application of DC working voltage for 30 minutes. |
| Working Voltage (VDC) | 6.3, 10, 16, 25, 35, 50, 63, 100 |
| D.F. (%)max. (for 6.3-100V) | 22, 17, 15, 14, 12, 10, 9, 8 |
| Z-25Z+20 (for 6.3-100V) | 4, 3, 2, 2, 2, 2, 2, 2 |
| Z-40Z+20 (for 6.3-100V) | 8, 6, 4, 3, 3, 3, 3, 3 |
| Working Voltage (VDC) | 160, 200, 250, 350, 400, 450 |
| D.F. (%)max. (for 160-450V) | 12, 12, 12, 15, 15, 17 |
| Z-25Z+20 (for 160-450V) | 2, 2, 3, 5, 6, 6 |
| Dimensions (D x L, mm) | Varies by model (e.g., 5X11, 6.3X11, 8X11.5, 10X12.5, etc.) |
| Ripple Current (mA, rms) at 105, 120Hz | Refer to detailed tables for specific WV, Cap, and Size combinations. |
