| Model Number | GF221M010C110A |
| Capacitance | 220F |
| Capacitance Tolerance | -20% ~ +20% |
| Rated Working Voltage (VDC) | 10V |
| Surge Voltage (VDC) | 12V |
| Maximum Dissipation Factor (%) | 14% (at 120Hz, 20C for 10V) |
| Ripple Current (100kHz /105C) (mA) | 340mA |
| Maximum Leakage Current (A) | 22A |
| Maximum Impedance (100kHz /20C) () | 0.21 |
| Operating Temperature Range (C) | -55 ~ 105C |
| Case Size (D* L) (mm) | 5x11mm |
| Endurance /105C (Hrs) | 2000 Hrs |
| Lead Diameter (d) (mm) | 0.5 |
| Lead Treatment | PET Sleeve |
| Dimensions (Unit=mm) | D=5, L=11, F=2, d=0.5 |
| Test Environment Temperature | 1535 (Standard) |
| Test Environment Humidity | 2575%RH (Standard) |
| Test Environment Air Pressure | 86KPa106KPa (Standard) |
| Capacitance Test Conditions | Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms |
| Dissipation Factor Test Conditions | Temperature: 202, Frequency: 120Hz, Voltage: 0.5Vrms |
| Leakage Current Test Conditions | Rated voltage applied for 2 min with 100010% protective resistor |
| Terminal Strength (Tensile) (0.35d0.5mm) | 5N (0.51Kg) |
| Terminal Strength (Bending) (0.35d0.5mm) | 2.5N (0.25Kg) |
| High Temperature Load Test Time | 2000 H at 105C |
| High Temperature Storage Test Time | 1000 H at 105C |
| Surge Test Cycles | 1000 cycles (30s charge, 330s discharge) |
| Vibration Test Frequency Scope | 10~55Hz |
| Vibration Test Amplitude | 0.75mm |
| Vibration Test Acceleration | 98 m/s (10g) |
| Solderability Solder Stove Temperature | 2455 |
| Solderability Immerse Time | 2.00.5S |
| Resistance to Soldering Heat Solder Stove Temperature | 2600~3 |
| Resistance to Soldering Heat Immerse Time | 101S |
| Temperature Cycling | 10 cycles (refer to JIS-C-5101-1 (2010) No:4.16) |
| High Temp and Humidity Conditions | 402, 90~95%RH for 250H |
