| Operating Temperature Range | Category Temperature Range | -40 ~ +105 |
| Voltage | Rated Voltage Range | 6.3 ~ 450V.DC |
| Capacitance Tolerance | Capacitance Tolerance | 20%(M) (at 20, 120Hz) |
| Leakage Current | Leakage Current (After 2 minute application of rated voltage) | I0.01CV or 3A, whichever is greater (at 20)
I0.02CV+10(A) (at 20) |
| Dissipation Factor | Dissipation Factor tan (Max.) (at 20, 120Hz) | 0.22 (6.3V), 0.19 (10V), 0.16 (16V), 0.14 (25V), 0.12 (35V), 0.10 (50V), 0.09 (63V), 0.08 (100V), 0.15 (160-450V)
*Note: For nominal capacitance exceeding 1000 F, add 0.02 for each 1000 F increase. |
| Low Temperature Characteristics | Impedance Ratio (at 120Hz) | Z(-25)/Z(+20) Max: 4 (6.3V), 3 (10-16V), 2 (50-100V), 5 (200V), 6 (250V)
Z(-40)/Z(+20) Max: 8 (6.3V), 6 (10V), 4 (16-100V), 7 (200V), 8 (250V) |
| Endurance | Load Life (at 105) | 6.3~100V: 2000h (5~8), 3000h (10)
160~450V: 3000h (6.3), 5000h (8)
*Specifications after test: Capacitance change 20%, D.F.(tan) 200% of initial, Leakage current initial specified value. |
| Shelf Life | Storage (at 105, no voltage) | 1000 hours
*Specifications after test: Capacitance change 20% of initial, D.F.(tan) 200% of initial, Leakage current 200% of initial. |
| Dimensions | Case Size (DL) | 5 (F=2.0, d=0.5), 6.3 (F=2.5, d=0.5), 8 (F=3.5, d=0.5/0.6), 10 (F=5.0, d=0.6), 13 (F=5.0, d=0.6), 16 (F=7.5, d=0.8), 18 (F=7.5, d=0.8) |
| Lead Spacing | F | 2.0mm to 7.5mm |
| Lead Diameter | d | 0.5mm to 0.8mm |
| Lead Length | L | (L<20)1.5, (L20)2.0 |
| Standard Ratings | WV (Vdc) / Cap. (F) / Case Size / Impedance ( Max. 20 /100kHz) / Rated ripple current (mArms) 105 /100KHz | (See attached tables for detailed values) |
