| Operating Temperature Range | Category Temperature Range | -40 ~ +105 |
| Voltage | Rated Voltage Range | 6.3 ~ 100V.DC |
| Capacitance Tolerance | | 20%(M) (at 20, 120Hz) |
| Leakage Current | | I0.01CV or 3A, Whichever is greater (After 2 minutes application of rated voltage) (at 20) |
| Dissipation Factor | tan (Max.) | 0.22 (6.3V) to 0.08 (100V) (at 20, 120Hz). For nominal capacitance > 1000F, add 0.02 for each 1000F increase. |
| Low Temperature Characteristics | Impedance Ratio (Max.) | Z(-25)/Z(+20): 4 to 2. Z(-40)/Z(+20): 8 to 3. (at 120Hz) |
| Endurance | At 105 | Capacitance change 30% or 25% of initial value. D.F. (tan) 200% of initial specified value. Leakage current Initial specified value. Durations: 6000~10000 hours depending on case size (5~18). |
| Shelf Life | At 105 (no voltage) | Capacitance change 25% of initial value. D.F.(tan) 200% of initial specified value. Leakage current 200% of initial specified value (after 1000 hours). |
| Dimensions | D (mm) | 5, 6.3, 8, 10, 13, 16, 18 |
| Dimensions | F (mm) | 2.0, 2.5, 3.5, 5.0, 7.5 |
| Dimensions | d (mm) | 0.5, 0.6, 0.8 |
| Dimensions | (mm) | 1.5 (L<20), 2.0 (L20) |
| Dimensions | L (mm) | Varies by case size (e.g., 11, 12, 13, 16, 20, 21, 25, 26, 30, 32, 35, 40) |
| Safety Vent | | Included (8 up) |
| Construction | | Tinned copper-ply wire, vinyl sleeve, rubber end seal |
| Ripple Current Coefficient | Frequency Coefficient | 120Hz: 0.40-0.85. 1k: 0.75-0.95. 10k: 0.90-0.98. 100k: 1.00. (Varies by capacitance) |
| Standard Ratings | WV(V) | 6.3, 10, 16, 25, 35, 50, 63, 80, 100 |
| Standard Ratings | Cap. (F) | 82 to 22,000 (Varies by WV) |
| Standard Ratings | Case size DL (mm) | e.g., 5X11, 6.3X11, 8X12, 10X13, 13X20, 16X26, 18X32 |
| Standard Ratings | Impedance (max. 20/100kHz | 0.011 to 0.80 (Varies by WV, Cap., and Case Size) |
| Standard Ratings | Maximum allowable ripple current at 105 /100kHz | 163 to 4700 (Varies by WV, Cap., and Case Size) |
