| Operating Temperature Range () | -55 to +105 C (63 - 100V) | -40 to +105 C (160 - 400V) |
| -25 to +105 C (450V) | |
| Rated Voltage Range () | 63 - 450V |
| Capacitance Tolerance () | 20% (M) (at 20C, 120Hz) |
| Leakage Current () (After 1 minute) | 0.03 CV or 4A, whichever is greater (for 63-100V) | 0.01 CV or 3A, whichever is greater (for 160-450V) |
| Leakage Current () (After 5 minutes) | 0.02 CV + 100 A (for CV>1000 F) | 0.04 CV + 100 A (for CV>1000 F) |
| Leakage Current () (After 2 minutes) | 0.01 CV + 40 A (for CV1000 F) | 0.02 CV + 25 A (for CV1000 F) |
| Dissipation Factor tan () (Max.) (at 20C, 120Hz) | Rated Voltage (V) | tan (Max) |
| 63, 10, 16, 25, 35, 50 | 0.22, 0.19, 0.16, 0.14, 0.12, 0.10 |
| 63, 100 | 0.09, 0.08 |
| 160 - 250 | 0.20 |
| 400, 450 | 0.24, 0.24 |
| Note on tan | If nominal capacitance exceeds 1000 F, add 0.02 for each 1000 F increase. |
| Low Temperature Characteristics () (Max. Impedance Ratio) | Rated Voltage (V) | Z(-25C)/Z(+20C) |
| 63, 10, 16, 25, 35, 50, 63, 100 | 4, 3, 2, 2, 2, 2, 2, 2 |
| 160-250 | 3 |
| 400, 450 | 5, 6 |
| Z(-40C)/Z(+20C) | 8, 6, 4, 3, 3, 3, 3, 3, 6, 6 |
| Z(-55C)/Z(+20C) | 8, 6, 4, 3, 3, 3, 3, 3 |
| Endurance () (at 105C with ripple current) | 2,000 to 8,000 hours (depending on voltage and capacitance) |
| Endurance Conditions (at 105C) | Rated Voltage (V) | Time |
| 63 - 100V | 5 & 63: 3000 hours; 8 & 10: 4000 hours; 13: 5000 hours |
| 160 - 450V | 5 & 63: 6000 hours; 8: 8000 hours |
| Post-Endurance Performance Requirements | Capacitance change | 20% of initial value |
| D.F. (tan ) | 200% of specified value |
| Leakage current (I_R) | specified value |
| Shelf Life () (1000 hours at 105C, no voltage applied) | Rated Voltage (V) | Performance Requirements |
| 63 - 100V | Capacitance change: 20% of initial value; D.F. (tan ): 200% of specified value; Leakage current (I_R): specified value |
| 160 - 450V | Capacitance change: 20% of initial value; D.F. (tan ): 200% of specified value; Leakage current (I_R): 500% of specified value |
| Dimensions (mm) () | Diameter (D) | Length (L) |
| 5, 6.3, 8, 10, 13, 16, 18, 20 | 15mm (for L15mm); 20mm (for L20mm) |
| Lead Pitch (p) | Diameter (d) |
| 2.0, 2.5, 3.5, 5.0, 7.5, 10 | 0.5, 0.6, 0.8 |
| Rated Ripple Current Coefficient () | Frequency Coefficient (at 120Hz) | |
| Rated Voltage (V) | Capacitance (F) | 120Hz | 1KHz | 10KHz | 100KHz |
| 6.3 - 100 | 5 - 33 | 0.42 | 0.70 | 0.90 | 1.00 |
| 39 - 270 | 0.50 | 0.73 | 0.92 | 1.00 |
| 330 - 680 | 0.55 | 0.77 | 0.94 | 1.00 |
| 820 - 1800 | 0.60 | 0.80 | 0.96 | 1.00 |
| 2200 - 6800 | 0.70 | 0.85 | 0.98 | 1.00 |
| 160 - 500V | 2.2 - 4.7 | 0.20 | 0.40 | 0.80 | 1.00 |
| 6.8 - 10 | 0.30 | 0.60 | 0.90 | 1.00 |
| 22 - 100 | 0.50 | 0.80 | 0.90 | 1.00 |
