| Operating Temperature Range | Category Temperature Range | -40 ~ +105 |
| Voltage | Rated Voltage Range | 6.3 ~ 450V.DC |
| Capacitance Tolerance | (at 20, 120Hz) | 20%(M) |
| Leakage Current | (After 2 minute application of rated voltage, at 20) | I 0.01CV or 3A, whichever is greater. For 6.3~100V: I 0.02CV + 10(A). |
| Dissipation Factor | tan (Max.) (at 20, 120Hz) | Varies by rated voltage (e.g., 0.22 for 6.3V, 0.08 for 100V, 0.2 for 450V). Add 0.02 for every 1000F increase beyond 1000F. |
| Low Temperature Characteristics | Impedance Ratio (at 120Hz) | Z(-25)/Z(+20) ranges from 2 to 8. Z(-40)/Z(+20) ranges from 3 to 8, depending on rated voltage. |
| Endurance | Load Life (at 105) | Capacitance change 20% of initial value. D.F.(tan) 200% of initial specified value. Leakage current initial specified value. Life: 2000h for 5~8 (6.3~100V), 3000h for 10 (6.3~100V); 3000h for 6.3 (160~450V), 5000h for 8 (160~450V). |
| Shelf Life | (1000 hours at 105, no voltage applied) | Capacitance change 20% of initial value. D.F.(tan) 200% of initial specified value. Leakage current 200% of initial specified value. |
| Dimensions | D (mm) | 5, 6.3, 8, 10, 13, 16, 18 |
| Dimensions | F (mm) | 2.0, 2.5, 3.5, 5.0, 7.5 |
| Dimensions | d (mm) | 0.5, 0.6, 0.8 |
| Dimensions | (mm) | 1.5 (L<20), 2.0 (L20) |
| Dimensions | L (mm) | Varies by case size |
| Dimensions | Safety Vent | (8 up) |
| Dimensions | Lead Wire | Tinned copper-ply wire, 15min. end seal, Vinyl sleeve, L . 5min. Rubber |
| Ripple Current Coefficient | Frequency Coefficient (at 105/100KHz) | Varies by rated voltage and capacitance (e.g., 1.00 for 100KHz across most capacitance ranges). |
| Standard Ratings | See detailed tables for WV(Vdc), Cap.(F), Case Size (DL mm), Impedance () Max. 20/100kHz, and Rated ripple current (mArms) 105/100KHz. |
| Example: 6.3V, 33F, 511mm, Max. Impedance 1.0, Rated Ripple Current 100mArms. |
| Example: 450V, 2.2F, 812mm, Max. Impedance 176, Rated Ripple Current 105mArms. |
