| Temperature Range | -55 to +105 C | |
| Rated Voltage Range | 6.3 - 100V | |
| Capacitance Tolerance | 20% (M) (at 20C, 120Hz) | |
| Leakage Current | 0.01CV or 3 A, whichever is greater (after application of rated voltage for 2 minutes) | C: Capacitance (F) |
| Rated voltage (V): 6.3, 10, 16, 25, 35, 50, 63, 80, 100 |
| Dissipation Factor (tan ) (Max.) | 0.22 (6.3V) | (at 20C, 120Hz) |
| 0.19 (10V) |
| 0.16 (16V) | |
| 0.14 (25V) | |
| 0.12 (35V) | |
| 0.10 (50V) | |
| 0.09 (63V, 80V) | |
| 0.08 (100V) | |
| For nominal capacitance exceeding 1000 F, add 0.02 to the value above for each 1000 F increase. (at 20C, 120Hz) | |
| Low Temperature Characteristics (Impedance Ratio Max.) | Z(-25C)/Z(+20C): 4 (6.3V), 3 (10V), 2 (16-100V) | |
| Z(-55C)/Z(+20C): 8 (6.3V), 6 (10V), 4 (16V), 3 (25-100V) | |
| Endurance (at 105C with rated ripple current) | Capacitance Change: 25% of initial value | |
| D.F. (tan ): 200% of specified value | |
| Leakage Current: Specified value | |
| Endurance Time | 6.3V: 4000h (5F), 6000h (8-10F), 8000h (13-18F)
10V: 6000h (5F), 7000h (8-10F), 10000h (13-18F)
16-100V: 6000h (5F), 7000h (8-10F), 10000h (13-18F) | |
| Shelf Life (at 105C for 1000 hours) | Capacitance Change: 25% of initial value | (after restoring to 20C) |
| D.F. (tan ): 200% of specified value | |
| Leakage Current: Specified value | |
| Dimensions (mm) | D: 5, 6.3, 8, 10, 13, 16, 18 | |
| L: 15 min | |
| d: 0.5 (D=5, 6.3, 8, 10), 0.6 (D=13, 16), 0.8 (D=18) | |
| p: 2.0 (D=5), 2.5 (D=6.3), 3.5 (D=8), 5.0 (D=10, 13), 7.5 (D=16, 18) | |
| a: 1.5 (L < 20) | |
| Vent: Yes (for D 8 up) | |
| Rated Ripple Current Coefficient (Frequency Coefficient) | Capacitance (F) | Frequency (Hz) |
| 22 - 180 | 1k: 0.40, 10k: 0.75, 100k: 0.90, 1M: 1.00 |
| 220 - 560 | 1k: 0.50, 10k: 0.85, 100k: 0.94, 1M: 1.00 |
| 680 - 1,800 | 1k: 0.60, 10k: 0.87, 100k: 0.95, 1M: 1.00 |
| 2,200 - 18,000 | 1k: 0.75, 10k: 0.90, 100k: 0.95, 1M: 1.00 |
| (at 120Hz) | |
