| Operating Temperature Range | 6.3 ~ 100V.DC | -40 ~ +105 |
| 160 ~ 500V.DC | -25 ~ +105 |
| Rated Voltage Range | | 6.3 ~ 500V.DC |
| Capacitance Tolerance | (at 20, 120Hz) | 20%(M) |
| Leakage Current | (at 20) | I 0.02CV (0.03CV for L=20mm) or 3mA, whichever is smaller (After 5 minutes application of rated voltage) |
| Dissipation Factor (tan Max.) | 6.3V | 0.60 |
| 10V | 0.50 |
| 16V | 0.40 |
| 25V | 0.30 |
| 35V | 0.25 |
| 50V | 0.20 |
| 63V | 0.15 |
| 80V | 0.15 |
| 100V | 0.15 |
| 160 ~ 250V | 0.15 |
| 315 ~ 400V | 0.20 |
| 450V | 0.20 |
| 500V | 0.24 |
| Dissipation Factor Note | | For nominal capacitance exceeding 1000F, add 0.02 for each 1000F increase. (at 20, 120Hz) |
| Low Temperature Characteristics (Impedance Ratio Max.) | 6.3V | Z(-25)/Z(+20): 4; Z(-40)/Z(+20): 15 |
| 10V | Z(-25)/Z(+20): 4; Z(-40)/Z(+20): 15 |
| 16V | Z(-25)/Z(+20): 4; Z(-40)/Z(+20): 15 |
| 25V | Z(-25)/Z(+20): 3; Z(-40)/Z(+20): 10 |
| 35V | Z(-25)/Z(+20): 3; Z(-40)/Z(+20): 8 |
| 50V | Z(-25)/Z(+20): 2; Z(-40)/Z(+20): 6 |
| 63V | Z(-25)/Z(+20): 2; Z(-40)/Z(+20): 6 |
| 80V | Z(-25)/Z(+20): 2; Z(-40)/Z(+20): 5 |
| 100V | Z(-25)/Z(+20): 2; Z(-40)/Z(+20): 5 |
| 160 ~ 250V | Z(-25)/Z(+20): 4; Z(-40)/Z(+20): - |
| 315 ~ 400V | Z(-25)/Z(+20): 4; Z(-40)/Z(+20): - |
| 450V | Z(-25)/Z(+20): 8; Z(-40)/Z(+20): - |
| 500V | Z(-25)/Z(+20): 10; Z(-40)/Z(+20): - |
| Endurance (at 105) | Condition | 2000 hours at 105 with maximum allowable ripple current, not over rated voltage range. |
| Capacitance Change | 20% of initial value |
| D.F. (tan) | 200% of initial specified value |
| Leakage Current (Endurance) | | Initial specified value |
| Shelf Life (at 105) | Condition | 1000 hours at 105 without voltage applied. |
| Capacitance Change | 20% of initial value |
| D.F. (tan) | 150% of initial specified value |
| Leakage Current (Shelf Life) | | 200% of initial specified value |
| Dimensions | Standard Terminal Type: S | 22 ~ 35 |
| Terminal Type: P | 35 |
| Terminal Type: L | 2230 ~ 50L |
| Dimensions Format | | DL (mm) |
| Ripple Current Coefficient | Frequency (Hz) | 50 | 120 | 300 | 1k | 10k | 50k |
| 6.3 ~ 50V | 0.95 | 1 | 1.03 | 1.05 | 1.08 | 1.08 |
| 63 ~ 100V | 0.92 | 1 | 1.07 | 1.13 | 1.19 | 1.2 |
| 160 ~ 250V | 0.81 | 1 | 1.17 | 1.32 | 1.45 | 1.5 |
| 315 ~ 450V | 0.77 | 1 | 1.16 | 1.3 | 1.41 | 1.43 |
| Standard Ratings | WV(V) | Cap.(F) | Case size (DL mm) | Max. Ripple Current (A.r.m.s) at 105/120Hz |
| 6.3(0J) | 6,800 | 2225 | 1.57 |
| 10(1A) | 10,000 | 2225, 2230, 2525 | 1.55, 1.97, 1.97 |
| 16(1C) | 12,000 | 2225, 2230, 2235, 2530, 3025 | 1.54, 1.77, 2.22, 2.24, 2.45 |
| 25(1E) | 1,800 | 2225 | 1.33 |
| 35(1V) | 2,700 | 2230, 2525 | 1.69, 1.70 |
| 50(1H) | 4,700 | 2225, 2230, 2525, 2245, 2535, 3030, 3525 | 1.50, 1.72, 1.80, 2.43, 2.39, 2.25, 2.48 |
| 63(1J) | 560 | 2225 | 1.05 |
| 80(1K) | 820 | 2225, 2230, 2525 | 1.11, 1.32, 1.33 |
| 100(2A) | 1,000 | 2225, 2235, 2530 | 1.22, 1.50, 1.51 |
| 160(2C) | 150 | 2220 | 0.66 |
| 180(2Z) | 180 | 2220 | 0.73, 0.72 |
| 200(2D) | 220 | 2220, 2225, 2520 | 0.8, 0.80, 0.79, 0.83 |
| 250(2E) | 56 | 2220 | 0.4 |
| 315(2F) | 68 | 2220, 2225 | 0.44, 0.51 |
| 350(2V) | 82 | 2225, 2520 | 0.64, 0.56, 0.51 |
| 400(2G) | 47 | 2220 | 0.37 |
| 450(2W) | 56 | 2220, 2225 | 0.4, 0.4 |
| 500(2H) | 68 | 2225, 2520 | 0.51, 0.46, 0.5, 0.5 |
