| Operation Temperature Range | | -55~105 |
| Voltage Range | | 6.3~50V |
| Capacitance Range | | 10~1500 F |
| Capacitance Tolerance | | 20% at 120Hz,20 |
| Leakage Current | | I=0.01CV or 3 A, take the maximum (C=rated capacitance in F, V=rated DC operating voltage in V) after 2 minutes at rated voltage. |
| Dissipation Factor (Tan) | (4~10) | 0.30 (6.3V), 0.24 (10V), 0.20 (16V), 0.18 (25V), 0.16 (35V), 0.14 (50V) |
| (12.5~16) | 0.35 (6.3V), 0.28 (10V), 0.24 (16V), 0.20 (25V), 0.18 (35V), 0.16 (50V) |
| Tan Additive Rule | | When capacitance exceeds 1,000 F, add 0.02 for every 1,000 F increase. |
| Stability at Low Temperature | ZT/Z20 (max) at -25 / 20 | D12.5: 4 (6.3V), 4 (10V), 3 (16V), 2 (25V), 2 (35V), 2 (50V) |
| ZT/Z20 (max) at -25 / 20 | D12.5: 5 (6.3V), 4 (10V), 3 (16V), 2 (25V), 2 (35V), 2 (50V) |
| Stability at Low Temperature | ZT/Z20 (max) at -55 / 20 | D12.5: 12 (6.3V), 8 (10V), 6 (16V), 4 (25V), 3 (35V), 3 (50V) |
| ZT/Z20 (max) at -55 / 20 | D12.5: 10 (6.3V), 8 (10V), 6 (16V), 4 (25V), 3 (35V), 3 (50V) |
| Endurance | | 4~5: 1,000 hours |
| 6.3*7.7~10: 2,000 hours |
| Capacitance Change (Endurance) | | D6.3mm: 25% of initial value; D8mm: 20% of initial value |
| Tan Change (Endurance) | Tan | D6.3mm: 300% of initial value; D8mm: 200% of initial value |
| Leakage Current (Endurance) | | Within specified value |
| Shelf Life | | 1000 hours (other test items same as Endurance) |
| Ripple Current Correction Factor | | (See table in source for specific values based on frequency and capacitance) |
| Case Size | (Unit: mm) | D=4~10mm, D12.5mm (See drawing and dimensions table in source) |
| Standard Products | (Selected examples) | (See table in source for detailed list of capacitance, voltage, size, and ripple current) |
| Ripple Current Note | | Capacitor life is halved for every 10 rise due to self-heating from ripple current. Reduce ripple current for longer life. |
