| Operation Temperature Range | -55~105 |
| Voltage Range | 6.3~50V |
| Capacitance Range | 10~1500 F |
| Capacitance Tolerance | 20% at 120Hz, 20 |
| Leakage Current | I=0.01CV or 3 A, take the maximum value (C=rated capacitance in F, V=rated DC working voltage in V) after 2 minutes at 6.3~50V. |
| Dissipation Factor (Tan) | 4~10 - 6.3V: 0.30
- 10V: 0.24
- 16V: 0.20
- 25V: 0.18
- 35V: 0.16
- 50V: 0.14
12.5~16 - 6.3V: 0.35
- 10V: 0.28
- 16V: 0.24
- 25V: 0.20
- 35V: 0.18
- 50V: 0.16
When capacitance exceeds 1,000 F, add 0.02 for every 1,000 F increase. |
| Stability at Low Temperature (at 120Hz) | Impedance ratio ZT/Z20 (max) Z(-25) /Z(20) - D12.5: 4 (6.3V), 4 (10V), 3 (16V), 2 (25V), 2 (35V), 2 (50V)
- D12.5: 5 (6.3V), 4 (10V), 3 (16V), 2 (25V), 2 (35V), 2 (50V)
Z(-55) /Z(20) - D12.5: 12 (6.3V), 8 (10V), 6 (16V), 4 (25V), 3 (35V), 3 (50V)
- D12.5: 10 (6.3V), 8 (10V), 6 (16V), 4 (25V), 3 (35V), 3 (50V)
|
| Endurance (Guaranteed life time) | - 4~5: 1,000 hours
- 6.3*7.7~10: 2,000 hours
|
| Capacitance Change (after endurance) | - D6.3mm: 25% of initial value
- D8mm: 20% of initial value
|
| Tan Loss Angle (after endurance) | - D6.3mm: 300% of initial value
- D8mm: 200% of initial value
|
| Leakage Current (after endurance) | specified value |
| High Temperature Storage (Shelf Life) | Guaranteed life time: 1000 hours, other test items same as endurance. |
| Ripple Current & Frequency Correction Coefficient | | Frequency (Hz) | Capacitance (F) | Coefficient | | 50 | 1,000 | 0.80 | | 1,000Capacitance8,200 | 0.85 | | 120 | 1,000 | 1.00 | | 1,000Capacitance8,200 | 1.00 | | 1K | 1,000 | 1.25 | | 1,000Capacitance8,200 | 1.15 | | 10K | 1,000 | 1.40 | | 1,000Capacitance8,200 | 1.25 | |
| Dimensions (Unit: mm) | | DXL | A | B | C | P0.2 | L0.2 | | 4X5.8 | 4.3 | 4.3 | 5.1 | 1.0 | 5.80.3 | | 5X4.5/5.8 | 5.3 | 5.3 | 6.0 | 1.5 | 4.5/5.80.3 | | 6.3X4/4.5 | 6.6 | 6.6 | 7.2 | 2.0 | 40.1/4.50.3 | | 6.3X5.8/7.7 | 6.6 | 6.6 | 7.2 | 2.0 | 5.8/7.70.3 | | 8X6.5 | 8.3 | 8.3 | 9.2 | 2.3 | 6.50.3 | | 8X10.5 | 8.3 | 8.3 | 9.2 | 3.1 | 10.50.5 | | 10X10.5 | 10.3 | 10.3 | 11.2 | 4.6 | 10.50.5 | |
| Standard Products Overview | | Rated Voltage VDC | Capacitance (uF) | DXL | mA | DXL | mA | DXL | mA | DXL | mA | DXL | mA | DXL | mA | | | 6.3V(0J) | | 10V(1A) | | 16V(1C) | | 25V(1E) | | 35V(1V) | | 50V(1H) | | | 10 | 4x5.8 | 19 | 4x5.8 | 19 | 4x5.8 | 19 | 4x5.8 | 16 | 4x5.8 | 18 | 4x5.8 | 20 | | 22 | 4x5.8 | 23 | 4x5.8 | 20 | 4x5.8 | 25 | 5x5.8 | 32 | 5X4.5 | 26 | 5x5.8 | 32 | | 33 | 4x5.8 | 30 | 4x5.8 | 22 | 4x5.8 | 35 | 5x5.8 | 35 | 5x5.8 | 35 | 6.3x5.8 | 48 | | 47 | 4x5.8 | 35 | 5x5.8 | 38 | 4x5.8 | 38 | 5x5.8 | 40 | 6.3x5.8 | 48 | 6.3x7.7 | 68 | | 56 | 4x5.8 | 38 | 5x5.8 | 40 | 5x5.8 | 40 | 5x5.8 | 40 | 6.3x5.8 | 48 | 8x6.5 | 86 | | 68 | 4x5.8 | 42 | 5x5.8 | 42 | 5x5.8 | 42 | 6.3x5.8 | 48 | 6.3x5.8 | 48 | 8x6.5 | 92 | | 100 | 5x5.8 | 54 | 5x5.8 | 60 | 5x5.8 | 60 | 6.3X4.5 | 55 | 6.3x5.8 | 80 | 8x6.5 | 90 | | 220 | 5x5.8 | 90 | 6.3X4.5 | 60 | 6.3x5.8 | 90 | 6.3x5.8 | 90 | 6.3x7.7 | 120 | 8x10.5 | 190 | | 270 | 6.3x5.8 | 105 | 6.3x5.8 | 105 | 6.3x7.7 | 120 | 6.3x7.7 | 130 | 8x10.5 | 190 | | | | 330 | 6.3x7.7 | 120 | 6.3x7.7 | 120 | 6.3x7.7 | 120 | 6.3x7.7 | 140 | 10x10.5 | 310 | | | | 470 | 6.3x7.7 | 140 | 6.3x7.7 | 140 | 6.3x7.7 | 140 | 8X10.5 | 310 | | | | | | 560 | 6.3x7.7 | 165 | 8x10.5 | 20 | 8x10.5 | 280 | 10X10.5 | 380 | | | | | | 680 | 6.3x7.7 | 345 | 8x10.5 | 280 | 10x10.5 | 310 | 10*10.5 | 380 | | | | | | 1000 | 8x10.5 | 330 | 10x10.5 | 380 | 10x10.5 | 380 | 10*10.5 | 380 | | | | | | 1500 | 10x10.5 | 380 | | | | | | | | | | | | Note: Case size D X L(mm), Impedance () at 20, 100KHZ, ripple current (mA rms) at 105, 120Hz. The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 10 rise. When long life performance is required in actual use, the ripple current has to be reduced. |
