| Operating Temperature Range | | -40 ~ 105 |
| Rated Voltage Range | | 4V ~ 100V |
| Nominal Capacitance Range | | 0.1F ~ 8200F |
| Nominal Capacitance Tolerance | (20, 120Hz) | 20% |
| Leakage Current (I) | (After 2 min. of rated voltage) | 0.01CRUR or 3A (whichever is greater) |
| Dissipation Factor (tg) | (Max, 20, 120Hz) | See table below |
| (For Capacitance > 1000F) | Add 0.02 for each additional 1000F |
| Nominal Capacitance, Rated Voltage, Rated Ripple Current & Case Size Table | Rated Voltage (V) | Capacitance (F) | Case Size (DL mm) | Rated Ripple Current (mA) |
| 4 | 100 | 6.35.4 | 71 |
| 35 | 100 | 6.37.7 | 90 |
| 63 | 100 | 810.5 | 150 |
| 100 | 100 | 1010.5 | 180 |
| 35 | 47 | 6.35.4 | 70 |
| 63 | 47 | 810.5 | 100 |
| 100 | 47 | 1010.5 | 130 |
| 35 | 220 | 810.5 | 320 |
| 63 | 220 | 1616.5 | 410 |
| 100 | 220 | 1616.5 | 410 |
| Case Size Table (mm) | D | L | A | B | C | H |
| 45.4 | 4 | 5.4 | 1.8 | 4.3 | 4.3 | 0.5~0.8 |
| 6.37.7 | 6.3 | 7.7 | 2.4 | 6.6 | 6.6 | 1.1~1.4 |
| 810.5 | 8 | 10.5 | 2.9 | 8.3 | 8.3 | 2.2~3.1 |
| 1010.5 | 10 | 10.5 | 3.2 | 10.3 | 10.3 | 3.1~4.5 |
| 1616.5 | 16 | 16.5 | 5.8 | 17 | 17 | 5.0~6.4 |
| 1821.5 | 18 | 21.5 | 6.8 | 19 | 19 | 6.4~6.4 |
| Tests | Item | Specification |
| Capacitance Measurement | Frequency, Voltage | 120Hz, 0.5Vrms |
| Dissipation Factor (tg) Measurement | Conditions | Same as Capacitance Measurement |
| Leakage Current Test | Conditions | Rated voltage applied for 2 min. |
| Maximum Permissible Ripple Current | Conditions | Continuous operation at specified frequency. (DC Voltage + Peak Ripple Voltage) Rated Voltage. |
| Temperature Characteristics | Impedance Ratio | Z(-25)/Z(+20) 7 (for 4V) |
| Surge Voltage Test | Cycles, Charge/Discharge Time | 1000 cycles, 305 sec charge / 5min30sec discharge |
| Terminal Strength (Tensile) | Force (N) | 0.3 |
| Terminal Strength (Bending) | Force (N) | 0.3 |
| Solderability | Temperature, Time | 2452, 30.5 sec |
| Resistance to Soldering Heat | Temperature, Time | 2605, 101 sec (or 35010, 3.50.5 sec) |
| Vibration Test | Frequency, Amplitude, Duration | 10-55Hz, 1.5mm amplitude, 2 hours per direction (3 directions) |
| Damp Heat Test | Temperature, Humidity, Duration | 402, 90-95% RH, 5008 hours |
| Shelf Life Test | Temperature, Duration | 105, 1000 hours (no voltage applied) |
| Load Life Test | Temperature, Voltage, Duration | 1052, Rated Voltage, 2000 hours (1000 hours for specific sizes/voltages) |
