| Dielectric | Metallized Polypropylene Film | | | |
| Metal Spray | Zinc Tin Alloy | | | |
| Lead Wire | Tin-plated Copper-clad Steel Wire | | | |
| Epoxy Resin | V-0 Flame Retardant Grade | | | |
| Plastic Case | V-0 Flame Retardant Grade | | | |
| Marking | Manufacturer Symbol, Type, Class, Capacitance, Tolerance, Rated Voltage, Climatic Category, Approval Marks, Manufacture Code | | | |
| Withstand Voltage (Between Terminals) | | 1.5-2 times rated DC voltage for 60 sec (for non-standard miniaturized products). Apply rated DC voltage for 60 sec (rate of rise 150V/s). | | Shall satisfy NO.5.1 |
| Withstand Voltage (Between Terminals & Enclosure) | | Min. 2,000VAC (Apply 2*Ur+1,500VAC for 2 to 5 sec.) | | Shall satisfy NO.5.1 |
| Dissipation Factor (DF) at 1KHz | 0.001 (0.1%) | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | | Max. 0.002 (0.2%) |
| Capacitance (CAP) | Within tolerance specified (at +20 5) | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | | Within 5% of the value before test |
| Insulation Resistance (I.R.) | 15,000 M (C0.33F) 5,000 M*F/C (C>0.33F) | Vt=100 VDC, Charge Time: 605 sec. | | 50% of the limit value of NO.5.4 |
| Soldering Property | | Soldering temperature: +265 5, Immersion duration: 3 0.5 sec. More than 90% of circumferential surface of lead wire shall be covered with new solder. | | |
| Terminal Strength (Tensile Strength) | | | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. Shall be no abnormality. | |
| Temperature Cycle | | | | Appearance: Shall be no remarkable change. Test cycle as specified. |
| Dry Heat Resistance | | | | Appearance: Shall be no remarkable change. Test Temperature: +110 2, Test Duration: 16 + 1/-0 hrs. |
| Cold Resistance | | | | Appearance: Shall be no remarkable change. Test Temperature: -40 3, Test Duration: 2 1 hrs. |
| Damp Heat Insulation | | | | Appearance: Shall be no remarkable change. Test Temperature: +40 2, Test Humidity: 90% to 95% RH, Test Duration: 21 days. |
