| Rated Capacitance | 0.15uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | K=10% | |
| Rated Voltage | 275VAC | |
| Voltage Proof | 4.3*UR Unit:VDC (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (DF) | 0.1% | (at 20, 1KHz) Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Insulation Resistance | 15000M (for C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C10%, DF0.8% (C1uF); DF0.5%;(C>1uF); IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | 40/100/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | Pull: 2.2 LBS; Time: 5 sec | No visible damage to the capacitor body. |
| Lead Bending Strength | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position; No visible damage to the leads. |
| Vibration | Amplitude: 1.5mm in three directions | Frequency cycle: 10Hz to 55Hz and then 10Hz; Time: 2 hours each direction (total 6 hours); No visible damage to the capacitor body. |
| Reference Standard | IEC 60384-14, UL60384 | |
| Construction - Dielectric | Polypropylene film | |
| Construction - Electrodes | Vacuum evaporated metal | |
| Construction - Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin meeting UL94V-0 | |
| Construction - Leads | Radial leads of tinned wire/insulation flexible wire | |
| Construction - Terminal contact | Electrically welded | |
| Dimensions (for 154K275VAC) | W 0.5: 18.0; H 0.5: 14.5; T 0.5: 8.5; P 1.0: 15.0; D 0.05: 0.8; L 5.0: 21.0 | Unit: mm; Color: Yellow |
| Storage Environment | Temperature 30, Humidity 70% (in MBB) | Ensures 24 months storage period if MBB is not opened. Avoid high temperature, high humidity and atmospheric contaminants. |
